. Then, click View Reference Guide or View Color Guide to open the guide. For Macintosh, double-click the Online Guide icon in the EPSON window and then the EPSON STYLUS COLOR 980 icon. Then, click View Reference Guide or View Color Guide to open the guide.
Page 3
CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of...
Do not use a damaged or frayed power cord. If you use an extension cord with the printer, make sure that the total ampere rating of the devices that are plugged into the extension cord does not exceed the cord’s ampere rating.
Always turn the printer off using the this button is pressed, the then goes off. Do not unplug the printer or turn off the power to the outlet until the Before transporting the printer, make sure that the print head is in the home (far right) position and that the ink cartridges are in place.
Page 8
Handling the ink cartridges Observe the following when handling the ink cartridges. Keep ink cartridges out of the reach of children. Do not allow children to drink from or otherwise handle the cartridges. Be careful when you handle the used ink cartridges, as there may be some ink around the ink supply port.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement. ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is...
For United Kingdom Users Use of options EPSON (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by EPSON (UK) Limited.
Replace fuses only with a fuse of the correct size and rating. Warnings, Cautions, and Notes Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer.
Printer Parts and Functions Printer Parts and Control Panel Functions paper support edge guides printer cover output tray sheet feeder output tray extension ink cartridge clamps Print head control panel adjust lever...
Page 13
Flashing when printer is receiving data, printing, replacing an ink cartridge, charging ink, or cleaning the print head. On when the printer is out of paper. Load paper in the sheet feeder, then press the resume printing. Flashing when the paper is jammed. Take all of the paper out of the feeder, then reload the paper.
When loading special media that is distributed by EPSON, read the instruction sheets packed with the media first and keep the points listed below in mind. For more details on using special media, see “Paper Handling”...
Loading capacities for EPSON special media See below to find the loading capacities for EPSON special media. Media Type 360 dpi Ink Jet Paper and Photo Quality Ink Jet Paper Photo Quality Ink Jet Cards, Ink Jet Note Cards, and Ink Jet...
About special media cleaning sheets Cleaning sheets that are packaged with EPSON special media should not be used with this printer. The cleaning function performed by these sheets is not necessary with this type of printer and the sheets may jam in the printer.
Page 17
Do not use envelopes that are curled or folded. Flatten the envelope flaps before loading. Avoid using envelopes that are too thin as they may curl during printing. Select Plain Paper as the Media Type setting in the printer driver. Available envelopes sizes are:...
The printer driver lets you choose from a wide variety of settings to achieve the best results with your printer. The printer utilities help you to check the printer and keep it in top condition.
Page 19
When you access the printer software from the Start menu, the settings that you make apply to all of your Windows applications. Refer to the appropriate section below. From Windows applications Follow the steps below to access the printer software from Windows applications.
Watermark Note: The Layout menu is available only for Windows 98, 95, 2000, and NT 4.0 users. The Mode settings on the Main menu are arranged to give you three levels of control over the printer driver, as explained below.
The Media Type setting determines what other settings are available, so you should always make this setting first. When this mode is selected, the printer driver takes care of all detailed settings based on the current Media Type and Ink settings.
On the Main menu, select the Media Type setting that matches the media that is loaded in the printer. To determine what Media Type you are using, locate your media in the list found under “Media types” on page 56, and refer to the corresponding Media Type under which it is grouped (shown in larger type).
Page 23
When you send a print job to the printer, the Print Preview window opens, allowing you to make changes before printing. The Preview dialog box contains several icon buttons that allow you to perform various functions. See online help for each function.
Page 24
View the individual pages that comprise a poster. The Poster window opens automatically when you send a print job while Poster is selected as the Multi-Page option on the Layout menu. From this window, you can view the individual pages which make up a poster.
Accessing help from the Windows Start menu To access help from the Start menu, click the Start button, point to Programs and then to Epson (for Windows 98 and 95) or EPSON Printers (for Windows 2000 and NT 4.0), then click EPSON Stylus COLOR 980 Help.
For information on using the printer utilities, see “Using the Printer Utilities” in the online Reference Guide. You can also get more information about the printer software by clicking the help icon in any of the dialog boxes in the printer driver. Making Changes to Printer Settings You will find the printer driver settings in the following dialog boxes.
Page 27
The Mode settings in the Print dialog box are arranged to give you three levels of control over the printer driver. The Mode settings are explained below. Automatic PhotoEnhance Custom When this mode is selected as the Mode setting in the Print dialog box, the printer...
5. When you want to print the document, double-click the file to open EPSON Monitor 3, make sure that the correct document is selected, then click the the data to the printer.
The Preview feature allows you to see how your document will look before actually printing it. Follow the steps below to preview your document. 1. Make your printer driver settings. 2. Click the Print button changes into a Preview button.
Page 30
Note: When using the double-sided printing feature, the Preview window allows you to toggle between pages in the print job by clicking the appropriate page in the list at the left side of the screen. The pages are listed in two columns, Front and Back. The pages in the Front column will print first.
Double-Sided Printing Using Double-Sided Printing The EPSON Stylus COLOR 980 allows double-sided printing. There are two types of double-sided printing available. Standard double-sided printing allows you to print the odd-numbered pages first. Once these are printed, you can reload the printouts in the sheet feeder and print the even-numbered pages on the other side of the paper.
Page 32
For Windows users, select the Double-Sided Printing check box on the Layout menu of your printer driver to use the double-sided printing feature. To access your printer driver, see “Accessing the printer software” on page 13. For Macintosh users, select the Double-Sided Printing check box in the Page Setup dialog box.
Page 33
Once the Double-Sided Printing check box is selected, it is possible to make the following double-sided printing settings. Margins Click this button to open the Margins dialog box, where you can specify which edge the binding will be on. You can choose between Left, Top, and Right.
Page 34
The odd-numbered pages will print first, unless Folded Booklet is selected. While the printer is printing the odd- numbered pages, instructions are displayed which explain how to reload the paper correctly. Follow the instructions to reload the...
Status Monitor utility. Using the printer's control panel The printer’s indicator lights will inform you when it is time to obtain a replacement ink cartridge and when it is time to replace an empty cartridge. You can also check ink levels and start the ink cartridge replacement procedure from your computer using the Status Monitor utility.
Page 36
Caution: EPSON recommends the use of genuine EPSON ink cartridges. Other products not manufactured by EPSON may cause damage to your printer not covered by EPSON's warranties. Leave the old cartridge installed in the printer until you have obtained a replacement; otherwise, ink remaining in the print head nozzles may dry out.
Follow the steps below to use the Nozzle Check utility. 1. Make sure that A4 or Letter size paper is loaded in the sheet feeder. 2. Click the Utility tab in the printer software, then click the Nozzle Check button. 3. Follow the on-screen instructions.
Page 38
If the nozzle check page does not print satisfactorily (for example, if any segment of the printed lines is missing), there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See the next section for details on cleaning the print head.
You can clean the print head from your computer using the Head Cleaning utility in the printer software, or from the printer itself by using the printer’s control panel buttons. For more information about the control panel buttons, see your online Reference Guide.
Page 40
If print quality remains a problem after replacing the ink cartridges, contact your dealer. Note: To maintain print quality, EPSON recommends turning on the printer for at least one minute every month. Utility icon button in the Print or Page Setup...
1. Make sure that A4 or Letter size plain paper is loaded in the sheet feeder. 2. Click the Utility tab in the printer driver, then click the Print Head Alignment button. 3. Follow the on-screen instructions to align the print head.
Page 42
5. Press the Enter key. The following window appears. 6. Make sure that your printer is selected. Click Next, then follow the on-screen instructions. For Macintosh users Follow the steps below to align the print head. 1. Make sure that A4 or Letter size plain paper is loaded in the sheet feeder.
Follow the steps below to check the installation and reinstall the drivers. 1. Turn the printer on. Plug the USB cable into the printer and the computer. 2. Right-click the My Computer icon on your desktop, then click Properties in the shortcut menu that appears.
Page 44
If your drivers are correctly installed, EPSON USB Printer Devices should appear in the list on the Device Manager menu. If EPSON USB Printer Devices does not appear in the list, click the plus (+) sign beside Other Devices to view the installed devices.
Page 45
4. Under Other Devices, select USB Printer or EPSON Stylus COLOR 980, then click Remove. Then click OK. 5. When the following dialog box appears, click OK. Then click OK again to close the Properties window. 6. Turn off both the printer and the PC. Then, install the drivers...
Page 46
Use the recommended USB cable as described in “System Requirements” in the online Reference Guide. If you use a USB hub, connect the printer to the first tier of the hub, or connect the printer to the computer’s USB port directly.
Using the Error Indicators You can identify many common printer problems using the lights on your printer’s control panel. If your printer stops working and the lights are on or flashing, use the following table of panel light patterns to diagnose the problem, then follow the recommended corrective measures.
= on, = off, = flashing Typical Problems and Solutions Most printer problems have simple solutions. Locate the problem in the list below, then apply the recommended solution. For more information, see “Troubleshooting” in the online Reference Guide. Print quality problems If you are having print quality problems, try the solutions offered for the problems listed in this section.
Page 49
Make sure that the printable side of the paper is face up in the sheet feeder. Run the Print Head Alignment utility. Clear the High Speed check box in your printer driver’s Advanced dialog box. For Windows users, see the printer driver’s online help for more information. For Macintosh users, see “Making the Media Type setting”...
Make sure that your paper is not damaged, dirty, or too old. Set the adjust lever to the “+” position, and make sure that the Media Type setting in your printer driver is correct. Paper feed or paper jam problems...
To cancel the print job, follow the instructions in the appropriate section below. For Windows 98, 95, 2000, and NT 4.0 users When you send a print job to the printer, the Progress Meter opens. Click the Stop button to cancel the print job.
When background printing is on Follow the steps below to cancel the print job. 1. Press the 2. Select EPSON Monitor3 from the application menu. EPSON Monitor3 opens. 3. Select the print job that you wish to cancel in the Document Name list, then click the job.
For United Kingdom and the Republic of Ireland users If you purchased your product in the UK or the Republic of Ireland, EPSON (UK) LTD provides a range of customer services and technical support. power button to turn off the printer.
Page 54
To email EPSON Technical Support: http://www.epson.co.uk/support/email/ For a full list of EPSON Customer and Warranty Support services: http://www.epson.co.uk/support/ Support via telephone Our Customer and Warranty Support teams can be contacted by calling 0870 163 7766 in the UK or 0044 0870 163 7766 from the Republic of Ireland.
Page 55
EPSON Helpdesk EPSON Helpdesk is provided as a final backup to make sure that our clients have access to advice. Operators at the Helpdesk can aid you in diagnosing hardware and software problems. They can also advise you on the latest EPSON products and where the nearest dealer or service agent is located.
Page 56
The more information you prepare, the faster we can help solve the problem. This information includes the User’s Guide for your EPSON product, type of computer, operating system, application programs, and any other information you feel is required.
Page 57
To obtain technical support as well as other after-sales services, users are welcome to contact EPSON Hong Kong Limited. Internet home page EPSON Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information:...
Page 58
(852) 2585-4399 Fax: (852) 2827-4383 For Philippines users To obtain technical support as well as other after sales services, users are welcome to contact the EPSON Philippines Representative Office at the telephone and fax numbers below: Phone: (632) 813-6552 Fax:...
Depending on your geographic location, one or both of these cables may not be supplied. Caution: Use only interface cables which meet the specifications listed above. Using other cables not covered by EPSON warranties may cause the printer to malfunction.
Page 60
Interface cards A number of optional interfaces are available to supplement the printer’s built-in interfaces. See “Using optional interface cards” in the online Reference Guide for more information. If you are not sure whether you need an optional interface or if you want to know more about interfaces, contact your dealer.
Note: The product numbers of ink cartridges may vary by location. Media types EPSON offers specially designed media for ink jet printers to meet most high-quality printing needs. To make the Media Type setting in your printer driver, select the Media Type setting that matches the media that is loaded in the printer.
Page 62
EPSON 360 dpi Ink Jet Paper (A4) EPSON 360 dpi Ink Jet Paper (Letter) EPSON Iron-On Cool Peel Transfer Paper (A4) EPSON Iron-On Cool Peel Transfer Paper (Letter) S041153 Photo Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper (A4)
Page 63
EPSON Photo Paper (200 EPSON Panoramic Photo Paper (210 EPSON Photo Paper Cards (A4) Photo Quality Glossy Film EPSON Photo Quality Glossy Film (A4) EPSON Photo Quality Glossy Film (Letter) EPSON Photo Quality Glossy Film (A6) EPSON Photo Stickers 16 (A6)
® 4.0 installed and a shielded, twisted-pair parallel cable connected. If you wish to connect your printer to a USB port, you need a Windows 98 or 2000 pre-installed PC that is equipped with a USB port and is connected to the printer via a shielded USB cable.
In addition to these system and memory requirements, you need 10 MB of free hard disk space to install the printer software. To print, you also need extra hard disk space amounting to about twice the size of the file that you want to print.
Using the online Reference Guide Refer to the appropriate section below for the minimum system requirements necessary to use the online Reference Guide. For Windows computers System Memory Hard disk space CD-ROM drive Display Browser For Macintosh computers System Memory Hard disk space CD-ROM drive Display...
EPSON Stylus COLOR 500 EPSON Stylus COLOR II LQ-860 LQ-2550 Note: The drivers for the printers listed above do not allow access to all of the features offered by the EPSON STYLUS COLOR 980, such as 720-dpi printing, 1440-dpi printing, and MicroWeave.
You can change many print settings such as print direction and loading position. Because these settings take effect each time you turn on the printer, they are also called default settings. The factory default settings are designed to meet the needs of most users, so you may not need to change them.
Your selections are indicated by the control panel lights. Follow the steps below. 1. Make sure that the printer is turned off and that A4 or Letter size paper is loaded in the sheet feeder. 2. Hold down the to enter the default-setting mode.
Page 70
Note: You may exit the default-settings mode at any time by turning off the printer. Any settings that you have made remain in effect until you change them. If you want to check the current default settings, enter the default- settings mode again and print the current default settings.
Page 71
EPSON OVERSEAS MARKETING LOCATIONS EPSON AMERICA, INC. 20770 Madrona Ave. P.O. Box 2842 Torrance, CA 90509-2842 Phone: (800) 922-8911 Fax: (310) 782-5220 EPSON DEUTSCHLAND GmbH Zülpicher Straße 6, 40549 Düsseldorf Germany Phone: (0211) 56030 Fax: (0211) 5047787 EPSON AUSTRALIA PTY. LTD.