Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual
Expand serial command functional specifications
Hide thumbs
Also See for PLC-XD2200 - XGA Able Multimedia Projector:
- Service manual (114 pages) ,
- Owner's manual (78 pages) ,
- Manual (24 pages)
Related Manuals for Sanyo PLC-XD2200 - XGA Able Multimedia Projector
Summary of Contents for Sanyo PLC-XD2200 - XGA Able Multimedia Projector
- Page 1 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XD2200 PLC-XD2600 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division...
-
Page 2: Table Of Contents
PLC-XD2200/2600 Expand Serial Command Functional Specifications - CONTENTS - Overview .........................8 Serial Interface Specification ..................8 2.1 Transfer Specification ....................8 2.2 Connection .........................8 Notes for communication ....................9 Name Definition ......................9 Functional Execution Command Table ..............10 Image Command Table ..................10 PC Adjust Control Command Table .............. - Page 3 PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command ................19 8.4.9 CF_PROGV Command ................. 19 8.4.10 CF_NZRED Command .................. 19 8.4.11 CF_IMAGE Command .................. 20 8.4.12 CF_COLBOARD Command ................. 20 8.4.13 CF_IMAGEADJ Command ................20 PC Adjust Control Command ................22 8.5.1 CF_FSYNC Command ..................
- Page 4 PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10 Setting Command ....................34 8.10.1 CF_LANG Command ..................34 8.10.2 CF_MENUPOSITION Command ..............34 8.10.3 CF_INPUTSEARCH Command ..............34 8.10.4 CF_AUTOSETUPPCADJ Command ............35 8.10.5 CF_AUTOSETUPKEYSTONE Command ............ 35 8.10.6 CF_AUTOSETUP Command ................ 35 8.10.7 CF_BACKGND Command ................
- Page 5 PLC-XD2200/2600 Expand Serial Command Functional Specifications Transfer Example ....................45 Operation Condition .................... 45 Image Status Read Command ................46 9.4.1 CR_BRIGHT Command ................46 9.4.2 CR_CONT Command ..................46 9.4.3 CR_COLOR Command ................. 46 9.4.4 CR_TINT Command ..................46 9.4.5 CR_SHARP Command .................
- Page 6 PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8.1 CR_SCREEN Command ................56 9.8.2 CR_ KYSTNMODE Command ..............56 9.8.3 CR_VSCALE Command ................56 9.8.4 CR_VPOS Command ..................56 9.8.5 CR_HSCALE Command ................56 9.8.6 CR_HPOS Command ..................57 Lamp Status Read Command ................58 9.9.1 CR_LAMPREPL Command ................
- Page 7 PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.22 CR_PJLOCKMENU Command ..............65 9.11.23 CR_FANMODE Command ................ 65 9.11.24 CR_FANCONTROL Command ..............65 9.11.25 CR_DELAYCTRL Command ..............66 9.11.26 CR_FILH Command .................. 66 9.11.27 CR_CCAPTIONDISP Command ............... 66 9.11.28 CR_CCAPTIONCOLOR Command ............66 9.11.29 CR_FILREPL Command ................
-
Page 8: Overview
PLC-XD2200/2600 Expand Serial Command Functional Specifications Overview 1.1 This Functional Specification defines communication functions for PLC-XD2200/2600. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands are defined as Expand Serial Commands. -
Page 9: Notes For Communication
PLC-XD2200/2600 Expand Serial Command Functional Specifications Notes for communication 1. Expand Serial Command is defined as one command / one line that starts with “C” and ends with carriage return (0x0D) 2. There are two types of commands: Functional Execution Command and Status Read Command. -
Page 10: Functional Execution Command Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_BRIGHT_%1[CR] Set Brightness value CF_CONT_%1[CR] Set Contrast value CF_COLOR_%1[CR] Set Color value CF_TINT_%1[CR] Set Tint value CF_SHARP_%1[CR] Set Sharpness value CF_GAMMA_%1[CR] Set Gamma value CF_WBAL-R_%1[CR] Set White Balance Red value CF_WBAL-G_%1[CR]... -
Page 11: Lamp Command Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 5.5 Lamp Command Table Execute command Item CF_LAMPH_%1[CR] Reset total running time of each lamp CF_LAMPMODE_%1[CR] Select Lamp mode 5.6 Sound Command Table Execute command Item CF_VOLUME_%1[CR] Set Volume value CF_MUTE_%1[CR] Control ON/OFF of Sound Mute 5.7 Setting Command Table Execute command Item... -
Page 12: Status Read Command Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command Item CR_BRIGHT[CR] Get Brightness value CR_CONT[CR] Get Contrast value CR_COLOR[CR] Get Color value CR_TINT[CR] Get Tint value CR_SHARP[CR] Get Sharpness value CR_GAMMA[CR] Get Gamma value CR_WBAL-R[CR]... -
Page 13: Screen Status Read Command Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table Status read command Item CR_SCREEN[CR] Get selected screen size CR_KYSTNMODE[CR] Get setting status of Keystone Store mode CR_VSCALE[CR] Get setting status of Vertical Scale CR_VPOS[CR] Get setting status of Vertical Position CR_HSCALE[CR] Get setting status of Horizontal Scale CR_HPOS[CR]... -
Page 14: Setting Status Read Command Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 6.8 Setting Status Read Command Table Status read command Item CR_LANG[CR] Get selected language CR_AUTOSETUPPCADJ Get setting status of Auto PC in Auto setup CR_AUTOSETUPKEYSTONE Get setting status of Keystone in Auto setup CR_INPUTSEARCH[CR] Get setting status of Input search CR_BACKGND[CR] Get setting status screen mode for the case of no signal... -
Page 15: Error Code Table
PLC-XD2200/2600 Expand Serial Command Functional Specifications 7. Error Code Table Error Code Contents -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) The function is not available in the selected Mode Selected value is out of range (Not reflected) Command mismatched to Hardware (command for Optional function which is not installed) When reached upper or lower limit of increasing or... -
Page 16: Functional Execution Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format PC issues commands in format as below: Pattern1 : “CF_COMMAND” [CR] Pattern2 : “CF_COMMAND_”%1 [CR] CF_ : Header COMMAND : Character line %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) The projector decodes the received command and when it is ready to receive the next command, it returns the response. -
Page 17: Image Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1”[CR] "000~063” --------------- Directly select Brightness setting value "UP” ----------------------- Current Brightness setting value + 1 "DN” ----------------------- Current Brightness setting value – 1 Set Brightness value of user control Projector does not save the value set with this command so that it resets when Details projector turning into Standby status or ALL is OFF. -
Page 18: Cf_Sharp Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command “CF_SHARP_%1”[CR] “000~015” ---------------- Directly select Sharpness setting value “UP” ------------------------ Current Sharpness setting value + 1 “DN” ------------------------ Current Sharpness setting value - 1 Set Sharpness value of user control Projector does not save the value set with this command so that it resets when Details projector turning into Standby status or ALL is OFF. -
Page 19: Cf_Coltemp Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command “CF_COLTEMP_%1”[CR] “000” ------ Xlow “001” ------ Low “002” ------ Mid “003” ------ High Set Color Temperature. (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when Details turning into Standby-mode or ALL is OFF, the value returns to original setting. -
Page 20: Cf_Image Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command “CF_IMAGE_%1”[CR] “DYNAMIC” ------ Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) “STAND” ---------- Standard (Image adjust value is set to factory default) “REAL” ------------ Real (Fixed value to display graphic image with natural tone) “CINEMA”... - Page 21 PLC-XD2200/2600 Expand Serial Command Functional Specifications 21 / 71...
-
Page 22: Pc Adjust Control Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1”[CR] “0000~0031” --------------- Directly select Fine Sync setting value “UP” -------------------------- Current Fine Sync setting value + 1 “DN” -------------------------- Current Fine Sync setting value - 1 Set Fine Sync value of PC signal Projector does not save the value set with this command so that it resets when Details... -
Page 23: Cf_H - Pos Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5.4 CF_H – POS Command Command “CF_H-POS_%1”[CR] “0000~nnnn” --- Directly select Horizontal Position setting value “nnnn” shows maximum value, it is current Total Dots value - Display Dots value “UP” -------------- Current Horizontal Position setting value + 1 “DN”... -
Page 24: Cf_Dline Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command “CF_DLINE_%1”[CR] “0100”~”nnnn” --- Directly select Display Line setting value “nnnn” shows maximum value, it is current Total Line value – Vertical Position value “UP” -------------- Current Display Line setting value + 1 “DN”... -
Page 25: Input Control Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1”[CR] “CONPUTER1” ----- Select Computer1 Input “COMPUTER2” ----- Select Computer2 Input “VIDEO” -------------- Select Video Input “UP” ------------------- Switch Input setting forward When Computer 2 is selected in Terminal menu: Computer1 →... -
Page 26: Cf_Input1 Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command Command “CF_INPUT1_%1_”[CR] “ANALOG” ---------- Select Analog RGB Input “YPBPR” ------------ Select Component “Sÿ VIDEO” -------- Select S-Video Input “SCART” ------------- Select SCART Select Computer 1 input and source specified by %1 at the same time. Details This command is available in normal Power ON status. -
Page 27: Cf_System Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable “Error Code”[CR] 8.6.7 CF_SYSTEM Command Command “CF_SYSTEM_%1”[CR] “VGA1” ------------- Select VGA1 “XGA1” ------------- Select XGA1 “WXGA3” ------------ Select WXGA3 “1080I” --------------- Select 1080I Input is “1035I” --------------- Select 1035I Computer “720P” ---------------- Select 720P ”575P”... -
Page 28: Screen Control Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command “CF_SCREEN_%1”[CR] “NORMAL” ---------------------- Select Normal size “TRUE” -------------------------- Select True size “WIDE” -------------------------- Select Wide size “FULL” --------------------------- Select Full screen size “CUSTOM” ---------------------- Select Custom size “DZOOM_UP”... -
Page 29: Cf_Keystone Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command “CF_KEYSTONE_%1”[CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part by 2steps “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN”... -
Page 30: Cf_Vpos Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command “CF_VPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15” ---------- -15 “UP”... -
Page 31: Cf_Hpos Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command “CF_HPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15” ---------- -15 “UP”... -
Page 32: Lamp Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command “CF_LAMPH_%1”[CR] “RST” Reset total lamp running time Details This command is available in normal Power ON status. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.8.2 CF_LAMPMODE Command Command “CF_LAMPMODE_%1”[CR] “HIGH”... -
Page 33: Sound Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command “CF_VOLUME_%1”[CR] “000-031” -------------------------- Directly select Volume setting value “UP” --------------------------------- Current Volume setting value +1 “DN” --------------------------------- Current Volume setting value -1 Control Volume value The same operation of Volume Up/Down as projector and RC, and directly select Volume setting value. -
Page 34: Setting Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command “CF_LANG_%1”[CR] “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED” --------------------------- Select Dutch “SVE”... -
Page 35: Cf_Autosetuppcadj Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable “Error Code”[CR] 8.10.4 CF_AUTOSETUPPCADJ Command Command “CF_AUTOSETUPPCADJ_%1”[CR] “ON” ------------------- Set Auto PC ADJ. function to ON “OFF” ------------------ Set Auto PC ADJ. function to OFF Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Details Note) It is unable to set Keystone, PC ADJ. -
Page 36: Cf_Disp Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.8 CF_DISP Command Command “CF_DISP_%1”[CR] “ON” ----------------------------- Select Display “OFF” --------------------------- Cancel Display “CNTDWNOFF” -------------- Count down OFF “UP” --------------- Switch Display mode forward (On → Countdown OFF → Off → On → 0û 0 û ) “DN”... -
Page 37: Cf_Ceil Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.10 CF_CEIL Command Command “CF_CEIL_%1”[CR] “ON” ------------------------ Set Ceiling to ON “OFF” ----------------------- Set Ceiling to OFF Set/Cancel Ceiling setting. The value set by this command is stored in EEPROM and its setting is effective Details even after ALL is OFF This command is available in normal Power ON status. -
Page 38: Cf_P-Mane Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.14 CF_P-MANE Command Command “CF_Pÿ MANE_%1”[CR] “OFF” --------------------------------- Set Power Management to OFF “READY” ----------------------------- Set Power Management to Ready “SHUTDOWN” --------------------- Set Power Management to Shut Down mode “UP” ------------------------------ Switch Power management setting (Off →... -
Page 39: Cf_Ptimemode Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.17 CF_PTIMEMODE Command Command “CF_PTIMEMODE_%1”[CR] “COUNTUP” ---------------- Select Count up “COUNTDN” ---------------- Select Countdown Set operation mode of P-timer. The status set by this command is stored in EEPROM and its setting is effective Details after ALL is OFF This command is available in normal Power ON status. -
Page 40: Cf_Keydis Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.21 CF_KEYDIS Command Command “CF_KEYDIS_%1”[CR] “NONE” ----------------------- RC & Projector keys are valid (All are valid) “RC” ---------------------------- RC keys are invalid “KEY” -------------------------- Projector keys are invalid Disable RC/Projector keys Details This command is available in normal Power ON status. Acceptable “000”[CR] Response... -
Page 41: Cf_Fancontrol Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.24 CF_FANCONTROL Command Command “CF_FANCONTROL_%1”[CR] “OFF” ---------------------------- Set Fan control to Off “ON1” ---------------------------- Set Fan control to On1 “ON2” ---------------------------- Set Fan control to On2 Set Fan control setting. The status set by this command is stored in EEPROM and its setting is effective Details even after ALL is OFF. -
Page 42: Cf_Ccaptioncolor Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.27 CF_CCAPTIONCOLOR Command Command “CF_CCAPTIONCOLOR_%1”[CR] “COLOR” ------- Select Color “WHITE” -------- Select White Select color of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF. Details This command is available in normal Power ON status. -
Page 43: Other Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command “CF_KEYENU_%1”[CR] “RIGHT” ------------------------- Shift Pointer on OSD Menu to right “LEFT” --------------------------- Shift Pointer on OSD Menu to left “UP” ------------------------------ Shift Pointer on OSD Menu to right “DN”... -
Page 44: Cf_Freeze Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command “CF_FREEZE_%1”[CR] “ON” ------------------------ Set Freeze to ON “OFF” ----------------------- Set Freeze to OFF “UP” ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e ) “DN”... -
Page 45: Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format PC issues commands in format as below: “CR_Command” [CR] Command : Character Line When projector receives the appropriate command, it returns a character line as the required data “000ÿ... -
Page 46: Image Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command “CR_BRIGHT”[CR] Details Get Brightness value of user control Acceptable “000_ÿ ÿ A ”[CR] Response “000”~“063” Unacceptable “Error Code”[CR] 9.4.2 CR_CONT Command Command “CR_CONT”[CR] Details Get Contrast value of user control Acceptable “000_ÿ... -
Page 47: Cr_Wbal - R Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable “Error Code”[CR] 9.4.7 CR_WBAL – R Command Command "CR_WBAL-R”[CR] Details Get White Balance Red value of user control Acceptable “000_%a”[CR] Response “000”~“063” Unacceptable “Error Code”[CR] 9.4.8 CR_WBAL – G Command Command "CR_WBAL-G”[CR] Details Get White Balance Green value of user control Acceptable “000_%a”[CR]... -
Page 48: Cr_Progv Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.4.12 CR_PROGV Command Command “CR_PROGV”[CR] Details Get setting status of Progressive scan Acceptable “000_%a”[CR] “L1” ----------------- Progressive Mode L1 is selected “L2” ----------------- Progressive Mode L2 is selected Response “FILM” -------------- Progressive Model FILM is selected “OFF”... - Page 49 PLC-XD2200/2600 Expand Serial Command Functional Specifications 49 / 71...
-
Page 50: Pc Adjust Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC”[CR] Details Get Fine Sync value Acceptable “000_%a”[CR] Response “0000”~“0031” Unacceptable “Error Code”[CR] 9.5.2 CR_TDOTS Command Command “CR_TDOTS”[CR] Details Get Total Dots value Acceptable “000_%a”[CR] “nnnn”~“mmmm”... -
Page 51: Cr_Ddots Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.5.6 CR_DDOTS Command Command “CR_DDOTS”[CR] Details Get Display Dots value Acceptable “000_%a”[CR] “0256”~“nnnn” Response (nnnn = Total Dots – Horizontal Position value) Unacceptable “Error Code”[CR] 9.5.7 CR_DLINE Command Command “CR_DLINE”[CR] Details Get Display Line value Acceptable “000_%a”[CR] “0100”~“nnnn”... -
Page 52: Video Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command “CR_SERSYS”[CR] Get currently selected signal Details Returns auto-detected signal in Auto mode Only available for Video input. (N/A when Input is computer) Acceptable “000_%a”[CR] “1080I60” -------------- 1080i 60Hz “1080I50”... -
Page 53: Input Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command “CR_INPUT”[CR] Details Get selected INPUT No. Acceptable “000_%1”[CR] Response Request data “1”-”3” Unacceptable “Error Code”[CR] 9.7.2 CR_SOURCE Command Command “CR_SOURCE”[CR] Details Get selected Source Acceptable “000_%1”[CR] “ANALOG”... -
Page 54: Cr_System Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7.6 CR_SYSTEM Command Command “CR_SYSTEM”[CR] Details Get selected System Acceptable “000_%1”[CR] “VGA1” -------------- VGA1 is selected “VGA2” -------------- VGA2 is selected ÿ “XGA1”-------------- XGA1 is selected ÿ “WXGA3” --------- WXGA3 is selected “1080i” ------------ 1080i is selected “1035i”... -
Page 55: Cr_Syslist Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7.7 CR_SYSLIST Command Command “CR_SYSLIST”[CR] Details Get selectable System titles Acceptable “000_%1_%2_..._%x” [CR] - When Input is PC-Analog “XGA1” ------------ XGA1is selectable “1080I ” ----------- 1080i is selectable Projector does not return Auto,Mode1-10 When there is no signal, it returns Error Code “101” -When Input is Y,Pb/Cb,Pr/Cr Returns all the System titles on Menu including Auto “AUTO”... -
Page 56: Screen Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command “CR_SCREEN”[CR] Details Get selected on-screen image size Acceptable “000_%a”[CR] “NORMAL” --------------- Normal mode is selected “TRUE” -------------------- True mode is selected Input “WIDE” --------------------- Wide mode is selected “FULL”... -
Page 57: Cr_Hpos Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8.6 CR_HPOS Command Command “CR_HPOS”[CR] Details Get setting status of Horizontal Position Store Mode Acceptable “000_%1”[CR] Response “-15” ~ “015” Unacceptable “Error Code”[CR] 57 / 71... -
Page 58: Lamp Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command “CR_LAMPREPL”[CR] Details Get information of Lamp Replacement time Acceptable “000_%1”[CR] “1Y” -------------------------- Over lamp replacement time “1N” -------------------------- Within lamp replacement time “1” means the number of lamps. Response (1 lamp model→... -
Page 59: Cr_Lampmsts Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command “CR_LAMPSTS”[CR] Details Get Lighting status of lamp Acceptable “000_%1”[CR] “n**** ” A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 ) Second character shows following status in order of lamp number. -
Page 60: Sound Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command “CR_VOLUME”[CR] Details Get Volume value of user control Acceptable “000_%a”[CR] Response “000”~“031” Unacceptable “Error Code” [CR] 9.10.2 CR_MUTE Command Command “CR_MUTE”[CR] Details Get sound mute setting status Acceptable “000_%a”[CR] “ON”... -
Page 61: Setting Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command “CR_LANG”[CR] Details Get selected language Acceptable “000_%a”[CR] “ENG” -------------------------- English is selected “DEU” -------------------------- German is selected “FRA” -------------------------- French is selected “ITA” --------------------------- Italian is selected “ESP”... -
Page 62: Cr_Backgnd Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable “Error Code”[CR] 9.11.5 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected Response “USER” ------------------------------- User is selected “BLACK” ------------------------------ Black Back is selected Unacceptable “Error Code”... -
Page 63: Cr_Terminal Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.10 CR_TERMINAL Command Command “CR_TERMINAL” [CR] Details Get setting status of Terminal Acceptable “000_%a”[CR] “COMPUTER”-------------Computer Input mode Response “MONITOR”----------------Monitor Out mode Unacceptable “?”[CR] 9.11.11 CR_STANDBYMODE Command Command “CR_STANDBYMODE” [CR] Details Get Standby Mode setting status Acceptable “000_%a”[CR] “ECO”... -
Page 64: Cr_Ptimemode Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.15 CR_PTIMEMODE Command Command “CR_PTIMEMODE”[CR] Details Get operation mode of P-timer. Acceptable “000_%a”[CR] “COUNTUP” ---------------- Count up is selected Response “COUNTDN” ---------------- Count down is selected. Unacceptable “Error code”[CR] 9.11.16 CR_PTIMER Command Command “CR_PTIMER”[CR] Details Get current status of P-timer Acceptable... -
Page 65: Cr_Keydis Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.20 CR_KEYDIS Command Command “CR_KEYDIS”(CR) Details Get disability status of RC/Projector keys (valid or invalid) Acceptable “000_%a”[CR] “NONE” -------------------------- RC / Projector keys are valid Response “RC” ------------------------------ RC keys are invalid “KEY” ----------------------------- Projector keys are invalid Unacceptable “Error Code”... -
Page 66: Cr_Delayctrl Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.25 CR_DELAYCTRL Command Command “CR_DELAYCTRL”[CR] Details Get setting status of Video delay control Acceptable “000_%1”[CR] “ON” ----------------------- Video delay control is active Response “OFF” ---------------------- Video delay control is inactive Unacceptable “Error Code”[CR] 9.11.26 CR_FILH Command Command “CR_FILH”[CR] Details... -
Page 67: Cr_Filtimer Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.30 CR_FILTIMER Command Command “CR_FILTIMER” [CR] Details Get setting time which filter warning OSD is displayed Acceptable “000_%1”[CR] “100” ----------------- 100 hours “200” ----------------- 200 hours Response “300” ----------------- 300 hours “OFF” ---------------- No OSD display Unacceptable “Error Code”[CR] 67 / 71... -
Page 68: Other Status Read Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command “CR_STATUS”(CR) Get status of Projector behavior. Details This command affects the same as ”CR0” of Basic Serial command, but this has an error code. Acceptable “000_%1”[CR] “00”= Power ON “80”= Stand by... -
Page 69: Cr_Tempwarn Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command “CR_TEMPWARN”[CR] Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature Details If there are several sensors installed, it is possible to get information from all the sensors at once. -
Page 70: Cr_Temp Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP”[CR] Get current temperature inside a projector. Details If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable “000_%1_%2_%3”[CR] %1= Sensor 1 temperature (Outside temperature) %2= Sensor 2 temperature (Inside temperature1) %3= Sensor 3 temperature (Inside temperature2) %1,%2 are consists of 6 bites fixed... -
Page 71: Cr_Tempfail Command
PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL”[CR] Get the temperature inside a projector when abnormal temperature occurs. Details If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable “000_%a_%b_%c”[CR] %a ------------------ Sensor 1 temp.