Related Manuals for Miele WCA 020
Summary of Contents for Miele WCA 020
- Page 1 Operating instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 11 637 111...
-
Page 2: Table Of Contents
Contents Warning and Safety instructions ................Operating the washing machine................10 Control panel........................10 How the sensors work ..................... 11 Caring for the environment ..................12 Before using for the first time..................13 Removing the open-end spanner................. 13 Washing environmentally and economically ............15 1. - Page 3 Screwing out and adjusting the feet ..............52 Installing under a continuous worktop ..............53 Washer and dryer stack ................... 53 The Miele water protection system................54 Connection to the water supply ................... 54 Connecting the water inlet hose ................55 Drainage...........................
- Page 4 Contents Programmable functions ..................... 60 Opening the programming level ................... 60 Choosing and selecting programmable functions ............. 60 Editing and saving the programmable function ............60 Exiting the programming level ..................61 Keypad tone ......................61 PIN Code ........................61 ...
-
Page 5: Warning And Safety Instructions
suitable for washing by the manufacturer indicated on the garment care label. Any other use is not permitted. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. This washing machine is not intended for use by persons (including ... - Page 6 The protective measures provided in the installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or replaced with equivalent measures in the installation.
- Page 7 Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the warranty.
- Page 8 Miele recommends using Miele descaler for washing machines which is available to order online at shop.miele.com (depending on country) or from Miele. Strictly observe the instructions on the packaging.
- Page 9 are used, warranty, performance and product liability claims will be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
-
Page 10: Operating The Washing Machine
Operating the washing machine Control panel a sensor (temperature) g Time display After the programme has started, the for selecting the temperature programme duration will appear in b sensor (spin speed) the display in hours and minutes. -
Page 11: How The Sensors Work
Operating the washing machine How the sensors work i Indicator lights The sensors control the values located lights up if there are faults with above them. the water inlet and drainage The , , , , and sensors ... -
Page 12: Caring For The Environment
Caring for the environment Disposal of the packing material Disposing of your old appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for disposal, also contain specific materials, and can normally be recycled. -
Page 13: Before Using For The First Time
Before using for the first time Remove the drain hose elbow Damage resulting from incorrect from the drum installation and connection. Installing and connecting the An elbow piece for the drain hose is washing machine incorrectly will stored in the drum. cause serious damage to property. - Page 14 Before using for the first time Removing the protective foil Opening the door at the end of and advertising stickers the programme Remove: The door remains locked during the Anti-crease phase. The indicators light - the protective foil from the door (if up for the first 15 minutes.
-
Page 15: Washing Environmentally And Economically
This will keep the energy and water bacteria and odours to build up in the consumption to a minimum in relation washing machine. Miele therefore to the size of the load. recommends cleaning the washing machine once every month. -
Page 16: Preparing The Laundry
Spillages should be carefully dabbed off using a soft, colourfast cloth. Do not rub. Useful tip: Please refer to the Miele website or Miele@mobile App for more information on stain removal. -
Page 17: Loading The Washing Machine
2. Loading the washing machine Opening the door Closing the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. -
Page 18: Selecting A Programme
3. Selecting a programme Touch the sensor to change the Programme selection preset spin speed. Each touch of the The washing machine is switched on by sensor decreases the value. After the turning the programme selector to a smallest value is reached, the display wash programme. -
Page 19: Adding Detergent
4. Adding detergent Adding fabric softener Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Filling with detergent Add fabric softener or liquid starch to the ... -
Page 20: Capdosing
Each capsule contains the correct amount for one wash cycle. You can order the capsules online at shop.miele.com (depending on country) or from Miele (see the end of this Open the lid of the / booklet for contact details). compartment. - Page 21 4. Adding detergent Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load).
-
Page 22: Starting The Programme
5. Starting the programme Starting a programme Adding or removing laundry during a programme sequence (AddLoad) Laundry can be added or removed at any time, provided that the symbol is not illuminated in the display. Touch the sensor. Rotating bars ... ... ... -
Page 23: At The End Of The Programme
6. At the end of the programme Opening the door and removing Items left in the drum could discolour the laundry other items in the next wash or become discoloured themselves. The door remains locked during the Check that all items have been Anti-crease phase. -
Page 24: Spinning
Spinning Final spin speed in wash Deselecting final spin (Rinse programmes hold) When a programme is selected, the Touch the sensor repeatedly until sensor for the optimum spin speed for the indicator (Rinse hold) lights that programme will be brightly lit up in the control panel. -
Page 25: Delay Start
Delay start With Delay start you can delay the start Starting Delay start of a programme from 30 minutes up to Touch the sensor. a maximum of 24 hours. This allows you The Delay start process starts and to make use of night-time economy counts down in the time display. -
Page 26: Programme Chart
Programme chart ECO 40-60 Max. load 7.0 kg Items For normally soiled cotton garments Notes A laundry load consisting of mixed cottons that are intended for washing at 40°C or 60°C can be washed in the same wash cycle. Information for customers: You cannot normally select any temperatures or Extras for the ECO 40-60 wash programme. - Page 27 Programme chart Delicates Cold to 40°C Max. load 2.0 kg Items Delicate garments made from synthetic fibre, mixed fibre, rayon and viscose. Curtains specified as machine-washable by the manufacturer. Notes - For items which crease easily, deselect the spin. Express 20 Cold to 40°C Max.
- Page 28 Programme chart Drain/Spin – Notes - Drain only: Set spin speed to . - Make sure you select the appropriate spin speed. Separate rinse/Starch Max. load 7.0 kg Items - For rinsing hand-washed items. - For starching table cloths, serviettes and workwear. Notes - Reduce the spin speed for fabrics that crease easily.
-
Page 29: Extras
Extras You can use the Extras sensor to Soak augment the wash programmes. For cleaning heavily soiled and stained Use the sensor to select or deselect items with protein stains. Extras. - A duration of between 30 minutes and 2 hours can be programmed in 30-minute increments for the soak process. -
Page 30: Programme Sequence
Programme sequence Main wash Rinse Spin Water Wash Water Rinses level rhythm level ECO 40-60 2–3 1,2,3 Cottons Minimum iron Woollens Delicates ... - Page 31 Programme sequence Special features in the = low water level programme sequence = medium water level Anti-crease: = high water level At the end of the programme the drum continues to turn at intervals for up to ...
-
Page 32: Changing The Programme Sequence
Changing the programme sequence Changing the programme Cancelling a programme (safety lock) You can cancel a programme at any time after it has started. It is not possible to change the programme, the temperature, the spin Turn the programme selector to the speed or the selected Extras after the position. -
Page 33: Garment Care Label Symbols
Garment care label symbols Washing Drying The figure quoted in the bucket is the Normal temperature maximum temperature at which the Low temperature garment can be washed. Do not tumble dry Normal agitation Reduced agitation Ironing Much reduced agitation ... -
Page 34: Detergent
Detergent The correct detergent Colour run and dye removers/ dyes All detergents produced for automatic front loading washing machines are Damage due to colour run/dye suitable. Follow the manufacturer's removers. instructions and dosage Colour run and dye removers can recommendations on the packaging. -
Page 35: Miele Detergents
Detergent Miele detergents Miele detergents have been specially designed for everyday use in Miele washing machines. See “Detergents and care products” for more information about these detergents. Miele detergents Miele capsules UltraWhite UltraColor ECO 40-60 ... -
Page 36: Cleaning And Care
Cleaning and care External casing and fascia panel Cleaning the detergent dispenser drawer Risk of electric shock! Washing at low temperatures and the Mains voltage is present when the use of liquid detergent can lead to a washing machine is switched off. build-up of mould and bacteria in the Disconnect the machine from the detergent dispenser drawer. - Page 37 Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
-
Page 38: Hygiene Info (Cleaning The Drum)
Cleaning and care Reassemble the filter and seal in the Hygiene info reverse order and reconnect the hose. (Cleaning the drum) Washing at low temperatures and/or Cleaning the filter in the inlet valve using liquid detergent can cause Using pliers, carefully loosen the bacteria and unpleasant odours to build ribbed plastic nut (seal) on the inlet up in the washing machine. -
Page 39: Problem Solving Guide
Problem solving guide Many malfunctions and minor faults that can occur in daily operation can be corrected without contacting Miele. This will save you time and money because you will not need a service call. You can find information on how to remedy faults yourself at www.miele.com.au/service or www.miele.co.nz/service and on the Miele website. -
Page 40: During The Programme, A Symbol Appears In The Time Display
Then switch the washing machine on again. Restart the programme. If the fault message appears again, contact Miele. During the programme, a symbol appears in the time display Message Possible cause and remedy ... -
Page 41: General Problems With The Washing Machine
In order to prevent bacteria and unpleasant odours building up in the washing machine, run the Cottons 90°C programme using Miele IntenseClean machine cleaner or a universal powder detergent. The detergent dispenser drawer was left closed after washing. -
Page 42: An Unsatisfactory Wash Result
Problem solving guide Problem Possible cause and remedy At the end of the The small pipe in the detergent dispenser drawer programme there is still onto which the capsule is placed is blocked. liquid in the capsule. Clean the small pipe. This is not a fault. -
Page 43: The Door Will Not Open
Wait until the temperature in the drum has in the time display. decreased and the bars have stopped flashing in the display. and alternately The door lock has jammed. appear in the time Call Miele. display. -
Page 44: Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Cut
Problem solving guide Procedure for draining the machine Opening the door in the event of a blocked drain outlet and/or When removing the drain filter, do power cut not remove it completely. Switch off the washing machine. Place a suitable container under the access panel, e.g. - Page 45 Problem solving guide Opening the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry. Remove the drain filter completely. ...
-
Page 46: Service
2 years. Miele. For further information, please refer to your warranty booklet. You can book a Miele customer service call-out online at www.miele.com.au/ service or www.miele.co.nz/service. Contact information for Miele can be found at the end of this booklet. -
Page 47: Installation
*INSTALLATION* Installation Front view a Inlet hose (tested to withstand e Detergent dispenser drawer pressures up to 7000 kPa) f Door b Electrical connection g Access to filter, pump and c Flexible drain hose (with detachable emergency release swivel elbow) h Four height-adjustable feet d Control panel... -
Page 48: Rear View
*INSTALLATION* Installation Rear view a Drain hose e Inlet hose (tested to withstand pressures up to 7000 kPa) b Transport clips for inlet and drain f Safety caps for transit bars hoses and mains connection cable c Electrical connection g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when when not in use... -
Page 49: Installation Surface
*INSTALLATION* Installation Installation surface Transporting the washing machine to its installation site A concrete floor is the most suitable installation surface. It is far less prone to Danger of injury due to vibration during the spin cycle than unsecured lid. wooden floorboards or a carpeted Make sure the fixings at the back of surface. -
Page 50: Removing The Transit Bars
*INSTALLATION* Installation Removing the right transit bar Removing the transit bars Removing the left transit bar Push the flap outwards and turn the transit bar 90° using the enclosed Push the flap outwards and turn the spanner. transit bar 90° using the enclosed spanner. -
Page 51: Fitting The Transit Bars
*INSTALLATION* Installation Covering the holes Risk of damage from incorrect transport. Risk of injury from sharp edges! The washing machine may become There is a risk of injury from reaching damaged if moved without the transit into holes that are not covered. bars in place. -
Page 52: Levelling The Machine
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. -
Page 53: Installing Under A Continuous Worktop
*INSTALLATION* Installation Installing under a continuous worktop Washer and dryer stack A Miele tumble dryer can be stacked Risk of electric shock due to with the washing machine. The exposed cables. appropriate “WTV” stacking kit* to There is a risk of coming into contact match your tumble dryer is required. -
Page 54: The Miele Water Protection System
Drain hose The Miele water protection system The drain hose is protected by a ventilation system which prevents the The Miele water protection system washing machine from being emptied protects all parts of the washing completely. machine and surrounds from water damage. -
Page 55: Connecting The Water Inlet Hose
– Make sure that the water can drain Maintenance away freely without hindrance. Only use a genuine Miele hose should Otherwise there is a risk of water you ever need a replacement. These are overflowing or of some of the... -
Page 56: Using The Elbow
*INSTALLATION* Installation Using the elbow Direct connection to a sink drain outlet To prevent the drain hose from slipping, use the enclosed elbow. a Adapter Attach the elbow to the drain hose b Washbasin nut . c Hose clip d End of the hose ... -
Page 57: Electrical Connection
Do not use an extension lead or The protective measures provided in the multi-socket plug adapter. domestic installation and in this Miele product must also be assured in their All electrical work must be carried out function and operation in isolated... -
Page 58: Technical Data
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 820 (+8/-2) mm Width for building under 600 mm Depth for building under 600 mm Weight Approx. 85 kg Capacity 7.0 kg dry laundry Supply voltage see data plate... -
Page 59: Consumption Data
Consumption data... -
Page 60: Programmable Functions
Programmable functions Touch the sensor to select the The programmable functions are used other programmable functions one to alter the machine's electronics to by one: suit changing requirements. Programmable functions can be Programmable functions altered at any time. Keypad tone ... -
Page 61: Exiting The Programming Level
Programmable functions Touch the sensor to switch the Options programmable function on/off or to = Keypad tone is switched off select an option: = Keypad tone is switched on Programmable function (factory default setting) Available options PIN Code ... -
Page 62: Indicator Switch-Off Status
Programmable functions Indicator switch-off status Longer pre-wash Cottons The indicators will switch off after If you require a longer pre-wash you 10 minutes to save energy. can extend the pre-wash time. Options Options = Off (factory default setting) ... -
Page 63: Gentle Action
= No higher water level (factory At high altitudes water has a lower default setting) boiling point. Miele recommends activating the Reduce temperature = Water level increased by 1 level setting at altitudes of or above when washing and rinsing 2000 m to prevent water from boiling. -
Page 64: Suds Cooling
Programmable functions Suds cooling Low water pressure When this is activated, additional If the water pressure is below 100 kPa water flows into the drum at the end of (1 bar), the washing machine cancels the main wash to cool the suds down. the programme and the ... -
Page 65: Detergents And Care Products
These and many other products can be - For synthetic fabrics ordered from shop.miele.com, Miele - Neutralises odours thanks to built-in directly or a Miele Experience Centre. odour absorber Detergent - Prevents static charge in clothes - Retains the shape and breathability of... -
Page 66: Fabric Care
Detergents and care products Fabric care Machine care products These fabric care products are available Descaling agent as convenient single-use capsules. - Removes heavy limescale deposits Caps Fabric Softener - Mild and gentle with natural citric acid - Fabric softener for freshly scented - Gentle on heater elements, drum and laundry other components... - Page 67 Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 1300 464 353 (1300 4 MIELE) info@miele.com.au www.miele.com.au Miele New Zealand Limited IRD 98 463 631 8 College Hill...
- Page 68 WCA 020 en-AU, NZ M.-Nr. 11 637 111 / 05...