Advertisement
Quick Links
WTV 408 Stacking Kit Installation Instructions
W1119 Washer and T1329C Dryer Only
Warning!
Prior to installation or service disconnect the units by "tripping" the breaker,
unplugging the unit or removing the fuse.
Installation and service should be by a Miele authorized service technician.
Work by unqualified persons could be hazardous and may void the warranty.
Stacking Kit Shelf Removal (Fig. 1)
• Push the self in slightly to release.
• Pull the shelf out until it stops.
• Lift the shelf slightly; pull forward
and tilt downward to remove.
Washer Lid Removal (Fig. 2)
c
Fig.2
b
a
• Remove the 2 screw caps (a)
a
• Loosen the lid screws 5 turns. (b)
• Push lightly on the screws to
release the retaining clips.
• Lift the front of the lid and slide it
backwards to remove.
• Remove the 2 screws from the
rear lid brackets (c)
• Slide the brackets to the side and
remove.
Fig.1
Advertisement
Related Manuals for Miele WTV 408
Summary of Contents for Miele WTV 408
- Page 1 WTV 408 Stacking Kit Installation Instructions W1119 Washer and T1329C Dryer Only Warning! Prior to installation or service disconnect the units by “tripping” the breaker, unplugging the unit or removing the fuse. Installation and service should be by a Miele authorized service technician.
- Page 2 Trimming the Dryer Door Panel (Fig.5) • Remove the trim frame from the dryer door. • Using a fine bladed jigsaw, cut 1 13/16” from the bottom of the door. • Using a hack saw, shorten the side trim by 1 13/16”...
- Page 3 • Place the dry in the guides of the stacking kit and slide back into position. • Install the retaining brackets and secure with the provided screws. (b) • Install the end caps (c) and secure with screws. • Reinstall the shelf.