Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Miele W 1930I WASHING MACHINE
Summary of Contents for Miele W 1930I WASHING MACHINE
-
Page 1: Washing Machine
Operating instructions for the W 1930i Washing Machine ö before... -
Page 2: Table Of Contents
Contents Guide to the machine Warning and Safety instructions Preparation for use Operating Instructions User-Maintenance Instructions Installation Instructions Technical data... -
Page 3: Guide To The Machine
Guide to the machine... - Page 4 Guide to the machine Detergent dispenser drawer...
-
Page 5: Important Safety Instructions
Important safety instructions SAVE THESE INSTRUCTIONS Refer to the Electrical Con- nection Section for ground- ing and installation instruc- tions. -
Page 6: Operating Instructions
OPERATING INSTRUCTIONS Help protect our environment OPERATING INSTRUCTIONS Help protect our environment Disposal of your old machine Disposal of the packing material... - Page 7 Economical usage Economy...
-
Page 8: Preparing The Laundry
Preparing the Laundry 1 2 3 Before washing Prepare the wash load... - Page 9 FINE/DELICATES ..2.0 lbs (1.0 kg) WOOLENS ... 2.0 lbs (1.0 kg) FINE RINSE ..11.0 lbs (5.0 kg)
-
Page 10: End Of Program
“Finish/Start” Press the “ON/OFF” button. Press the “Door” button. Do not attempt to remove laundry from the machine if the drum is turning. You may seriously injure yourself. If the drum turns with the door open, contact the Miele Service Department. -
Page 11: Changing The Program Sequence
Changing the program sequence To cancel a program: To omit a program stage: To interrupt a program: To change an incorrectly selected program:... -
Page 12: Adding Detergent
Adding detergent It is important to add the cor- rect amount of detergent, be- cause..too little detergent can result in: Do not use chlorine bleach! ...too much detergent can result in: Water Softeners For small loads:... -
Page 13: Adding Fabric Softener Or Starch
Adding fabric softener or starch Starch Using the “Starch” program to dis- pense liquid starch. -
Page 14: Program Selection
Program selection Program Temperature range Fabric COTTONS PERMANENT PRESS FINE/DELICATES WOOLENS Starch Spin Drain Fine rinse... - Page 15 Additional options Normal wash cycle Rapid wash available cycle...
-
Page 16: Program Sequence
Program sequence COTTONS PERMANENT FINE/ PRESS DELICATES ß ß ß ß ß ß ß ß ß ß ß ß ß ß ß Explanations: Interim rinse: Graduated rinse: (1) Increased water level:... - Page 17 WOOLENS Starch Spin Fine rinse ß ß ß ß ß ß Graduated spin: Final spin: Woolens: “Without final spin”:...
-
Page 18: Textile Care Symbols
Textile care symbols Washing (°C) 4321 Tumble dry Ironing Temperature Conversion Chart °C °F... -
Page 19: Additional Options
Additional options “Gentle wash” “Pre-wash” “Rapid wash” To operate: “Water plus”... - Page 20 Delay start/Time remaining indicator Time display “H:min” Remaining time Delay Start Entering the start delay: Select the program Program start Deleting the start delay...
-
Page 21: User-Maintenance Instructions
USER MAINTENANCE INSTRUCTIONS Cleaning and care Cleaning the washing machine Cleaning the detergent drawer. -
Page 22: Cleaning And Care
Cleaning and care Cleaning the drain pump and lint trap. (max. 6.5 gal/25l) - Page 23 Cleaning and Care...
- Page 24 Cleaning and care Cleaning the water inlet filters. To clean the filter in the inlet hose: To clean the filter in the inlet valve:...
-
Page 25: Problem Solving Guide
Problem solving guide Any work done on the electrical components of this appliance should only be performed by a qualified and trained person in accordance with all local and national codes and regulations. Unauthorized repairs may result in personal injury and damage to the machine. - Page 26 . . . The “Final spin” indicator lamp is flashing? – – . . . The “ON” indicator lamp is flashing? . . . The wash is too wet after the final spin? . . . The machine shakes dur- ing the spin cycle?
- Page 27 Problem solving guide What to do if, . . . Cause . . . Remedy ..In spite of adequate water supply, the water flows slowly into the machine? – . . . Large residues of deter- gent remain in the dispenser –...
- Page 28 Problem solving guide What to do if, . . . Cause . . . Remedy . . . – . . . Grey greasy particles cling to washed laundry? – – . . . Liquid detergent does not give the required result? –...
- Page 29 Problem solving guide Opening the drum door in the event of a power failure...
- Page 30 Problem solving guide To check water pressure Electric socket...
- Page 31 After sales service...
-
Page 32: Installation Instructions
INSTALLATION INSTRUCTIONS Installation Installation surface Installation Removing the shipping struts... - Page 33 Installation...
- Page 34 Installation Levelling the machine Building in...
- Page 35 Installation Please note the following: Matching the control panel to the adjacent washer fronts 7 16 Important...
- Page 36 Installation Installing the front panel 7 16 3 16 tem- plate locations 1 and 2 only...
- Page 37 Installation...
- Page 38 Installing the toekick Height from the Number Maximum floor to the bot- toekick height tom of the spacer countertop frames Washer-Dryer stack rquired 15 16 15 16 A washer and dryer should never be stacked without using the proper stacking kit.
- Page 39 Installation Any residual water left in the Water hardness reminder machine from the factory test- ing process can be flushed out as follows:...
- Page 40 Directly into a sink: Connection to a stand pipe: To a floor drain: Special note If connecting the machine to a cold water supply only, use the included Y- adapter to connect both hoses to the cold water valve, otherwise the cor- rect functioning of the machine could be impaired.
- Page 41 Electrical connection GROUNDING INSTRUCTIONS ELECTRICAL INSTRUCTIONS Warning “EASY INSTALLATION KIT”...
- Page 42 OPERATING INSTRUCTIONS Programmable functions To change a program once the Program lock is activated: High water level (only in “Cottons” rinses) 5th Rinse in the “Cottons” program No water intake through compartment i Additional rinse in Rapid wash Program Lock...
- Page 43 Programmable functions Step 1: Step 2: 4 seconds Step 3:...
-
Page 44: Programmable Functions
Programmable functions Step 4: Desired function: Step 5 High water level 5th rinse cycle Step 5 No water intake Step 5 through compartment Program Lock (Child safety feature) Step 5... - Page 45 Programmable functions Additional rinse in Step 5 Rapid wash Step 5: Step 6:...
- Page 46 Programmable functions To check if the function has Deleting the additional func- been stored: tions: Steps 1 to 4.
- Page 47 INSTALLATION INSTRUCTIONS Technical data Dimensions...
-
Page 48: Technical Data
Technical data Specifications Program duration (approximate): Spin speed: Detergent dispenser: Temperature control:...