Related Manuals for Miele WKB 130
Summary of Contents for Miele WKB 130
- Page 1 Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 555 920...
-
Page 2: Caring For The Environment
/ recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of. -
Page 3: Table Of Contents
Contents Caring for the environment .................. 2 Warning and Safety instructions ................. 6 Operating the washing machine ................ 13 Control panel ......................13 Examples on how to operate the machine............15 Before using for the first time ................ 16 Setting the language ..................... 16 Removing the transit bars .................. - Page 4 Water softeners ..................... 42 Dispensing aids ..................... 42 Fabric conditioner and liquid starch ..............42 Miele recommended detergents ................43 Recommended detergents in accordance with Directive (EU) Nr. 1015/2010..44 Cleaning and care .................... 46 Cleaning the drum (Hygiene info) ................46 External casing and fascia panel................
- Page 5 Contents Levelling the machine.................... 64 Screwing out and adjusting the feet.............. 64 Building under a continuous worktop/ in a kitchen run........ 65 Washer-dryer stack .................. 65 The water protection system................. 66 Connection to the water supply ................67 Connection to the drainage system ..............68 Electrical connection U.K.
-
Page 6: Warning And Safety Instructions
It must be used only as a domestic appliance to wash items which are specified by the manufacturer as being washable on the wash care label. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. - Page 7 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised. Children 8 years and older may only use the washing machine unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
- Page 8 It is essential that this standard safety requirement is met. If in any doubt, please have the wiring system of the building tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). ...
- Page 9 The machine must not be used in a non-stationary location (e.g. on a ship). Do not make any alterations to the machine, unless authorised to do so by Miele.
- Page 10 Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
- Page 11 If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaling agent which is available to order online at www.miele-shop.com or from Miele. Strictly observe the instructions on the packaging.
- Page 12 A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
-
Page 13: Operating The Washing Machine
Operating the washing machine Control panel a Display with sensors f Option buttons See the next page for more Various options can be added to the information. wash programme. b Start/Stop button g Programme selector For starting the programme selected For selecting the wash programme. - Page 14 Operating the washing machine Standard display The standard display shows the following from left to right: 2:59 1600 – the programme duration – the selected wash temperature – the selected spin speed Programme duration After the programme has started the j ...
-
Page 15: Examples On How To Operate The Machine
Operating the washing machine Setting numerical values Examples on how to operate the machine Start in Scrolling through a list A numerical value is highlighted in The arrows in the display indicate that white. Touching the sensor a list is available. decreases the value and touching the ... -
Page 16: Before Using For The First Time
Before using for the first time Switch on the washing Before using the machine for the machine first time ensure that it is correctly installed and connected. See Press the button. "Installation and connection". Also The welcome screen will light up. check that the drain filters are securely tightened to prevent the risk Setting the language... -
Page 17: Starting The Calibration Programme
Before using for the first time Starting the calibration programme The following message appears in the display: Open and run Cottons 90°C without laundry Touch the sensor repeatedly until you have read all the rows of text. The OK sensor will light up. -
Page 18: Washing Environmentally And Economically
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy – Do not exceed the amounts of usage are determined by the size of detergent recommended by the the load. manufacturer on the packaging. To make the most of your machine, –... -
Page 19: Prepare The Laundry
1. Prepare the laundry Tip: Badly soiled areas can be pre- treated with liquid detergent, stain removers etc. first, following the manufacturer's instructions. With particularly stubborn stains ask your dry cleaner for advice. Solvent-based cleaners (e.g. benzine) can damage plastic parts. When pre-treating garments, make sure that any plastic parts (e.g. -
Page 20: Select A Programme
2. Select a programme Switch on the washing machine Press the button. Programme selection Turn the programme selector to the required programme. The load for the programme selected will appear in the display. This will then be replaced by the standard display. -
Page 21: Load The Washing Machine
3. Load the washing machine Open the door Close the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. -
Page 22: Select Programme Settings
4. Select programme settings The following parameters will change Degree of soiling depending on the degree of soiling Lightly soiled selected: No visible dirt or stains. Possibly slight – with the Heavy degree of soiling body odour. setting, a pre-wash will be carried out Normally soiled automatically for some programmes Visibly dirty and/or just a few slight... - Page 23 4. Select programme settings Selecting a spin speed Switch on delay start (if required) You can alter the pre-set spin speed of The start of a programme can be a wash programme. delayed from 15 minutes up to 24 Press the Spin speed button. hours, allowing you to make use of night-time economy electricity rates, for The following will appear in the display:...
-
Page 24: Add Detergent
5. Add detergent There are several options for adding detergent. Detergent dispenser drawer Too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch. – Greasy particles clinging to laundry. –... -
Page 25: Capdosing
Each capsule contains the correct amount for one wash cycle. You can order the capsules online at Open the lid of the / www.miele-shop.com or from Miele compartment. (see the end of this booklet for contact details). ... - Page 26 5. Add detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. No additional fabric conditioner may be added to the compartment when using a capsule. ...
-
Page 27: Start The Programme - The End Of A Programme
6. Start the programme - the end of a programme Start the programme Touch the flashing Start/Stop sensor. The door will lock (the will appear in the display to show this) and the programme will start. If a delay start time has been selected, then this will count down in the display. -
Page 28: Spinning
Spinning Final spin speed Final spin speed in the programme Programme When a programme is selected the Cottons 1600 optimum spin speed for that Minimum iron 1200 programme will appear in the display. Woollens 1200* For programmes marked with a * in the chart, the optimum spin speed is not Separate rinse / Starch 1600*... - Page 29 Spinning To omit the final spin (Rinse hold) Use the Spin speed button to select the setting (Rinse hold). The laundry is not spun after the final rinse and remains in the final rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the programme.
-
Page 30: Delay Start
Delay start With delay start you can choose when To change delay start you want the programme to start. You You can change delay start at any time. can delay the start of the programme from 15 minutes up to a maximum of 24 ... -
Page 31: Programme Chart
Programme chart Cottons cold to 90 °C Max. load 8.0 kg Use for Cotton, linen or cotton mix fabric, e.g. table linen, towelling, underwear, T-shirts etc. The settings 60 °/40 °C differ from / as follows: Note – Shorter programme durations – Longer temperature holding times –... - Page 32 Programme chart Woollens cold to 40 °C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabric. If the care label does not specify a temperature, wash using the cold setting. Note Reduce the spin speed for items which crease easily. Separate rinse / Starch Max.
- Page 33 Programme chart Express 20 cold to 40 °C Max. load 3.5 kg Use for Cotton garments that have hardly been worn or are only very lightly soiled. Note The Short option is activated automatically. Dark garments / Denim cold to 60 °C Max.
-
Page 34: Options
Options Options are selected and deselected via Short the relevant buttons and the display. Use this option for light soiling with no visible staining. The wash duration is reduced. Water plus The water level in the wash and rinse stages is increased and a second rinse is carried out in the "Separate rinse / Starch"... -
Page 35: The Following Options Can Be Selected In Addition To The Programme
Options The following options can be selected in addition to the programme: None of the options can be selected with programmes which are not listed in the chart below. Pre-ironing Short Water plus Pre-wash Cottons Minimum iron Separate rinse / –... -
Page 36: Programme Sequence
Programme sequence Main wash Rinses Spinning Water Wash Water Rinses level rhythm level 1)2)3) Cottons 2)3) Minimum iron Woollens Separate rinse / Starch 2)3) Delicates ... - Page 37 Programme sequence Special features in the = Low water level programme sequence = Medium water level Anti-crease: = High water level At the end of the programme the drum = Intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
-
Page 38: Garment Care Label Symbols
Garment care label symbols Drying Washing The number of dots indicates the The figure quoted in the bucket is the drying temperature maximum temperature the garment can be washed at. The number of Normal temperature bars under the symbol indicates the ... -
Page 39: Changing The Programme Sequence
Changing the programme sequence Cancelling a programme Changing a programme You can cancel a programme at any After the start of a programme it is no time after it has started: longer possible to select a different programme. Press the Start/Stop button. Temperature The following will appear in the display: With the exception of the Cottons... -
Page 40: Adding Or Removing Laundry After The Programme Has Started
Changing the programme sequence Please note: Adding or removing laundry after the programme has Once a programme has started the started washing machine cannot recognise any adjustment to the load. Press the Start/Stop button. For this reason, if laundry is added or The following will appear in the display: removed after the start of a programme, the machine will always complete the... -
Page 41: Safety Lock
Changing the programme sequence To deactivate the safety lock Safety lock Proceed as for activating the safety The safety lock prevents the lock. temperature, spin speed or options being altered during a wash The following will appear in the display: programme. -
Page 42: Detergent
Detergent The correct detergent Dispensing aids All detergents produced for automatic Use dispensing aids, (e.g. balls) if these washing machines are suitable. Follow are supplied with the detergent, the manufacturer's instructions and particularly when using liquid detergent. dosage recommendations on the Refill packs of detergent packaging. -
Page 43: Miele Recommended Detergents
Detergent Miele recommended detergents Miele detergents and care products have been specially designed for Miele washing machines. They are available to order via the internet at www.miele- shop.com or from Miele. Miele Miele Miele Miele Miele Cap Cap ... -
Page 44: Recommended Detergents In Accordance With Directive (Eu) Nr. 1015/2010
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart. Universal Coloureds Delicates and Specialist woollens detergent Cottons – – Minimum iron – – – Woollens ... - Page 45 Detergent Adding fabric conditioner or liquid Dispensing fabric conditioner starch separately and liquid starch at the end of Prepare the starch in accordance with the programme the manufacturer's instructions on the packaging. Tip: When adding fabric conditioner separately, activate the Water plus option.
-
Page 46: Cleaning And Care
Cleaning and care Cleaning the drum Cleaning the detergent (Hygiene info) dispenser drawer Washing at low temperatures and/or Washing at low temperatures and the using liquid detergent can cause use of liquid detergent can lead to a bacteria and unpleasant odours to build build-up of mould and bacteria in the up in the washing machine. - Page 47 Cleaning and care Cleaning the siphon tube and the channel Liquid starch can cause the siphon to become clogged. Make sure that you clean the siphon and siphon tube particularly thoroughly after using liquid starch a few times. Clean the fabric conditioner channel with a brush and hot water.
-
Page 48: Cleaning The Water Inlet Filters
Cleaning and care To clean the filter in the water inlet Cleaning the water inlet filters valve: The washing machine has two filters to Using pliers, carefully loosen the protect the water inlet valve. These ribbed plastic nut on the inlet valve filters should be checked every six and unscrew. -
Page 49: Problem Solving Guide
Problem solving guide Minor faults in the performance of the washing machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: ... -
Page 50: The Following Fault Messages Appear In The Display And The Programme Stops
Problem solving guide The following fault messages appear in the display and the programme stops Problem Cause and remedy The water inlet is blocked or restricted. Water intake See Check whether the stopcock is opened properly. Check whether the inlet hose is kinked. ... -
Page 51: A Message Appears In The Display At The End Of The Programme
In order to prevent bacteria and unpleasant odours building up in the machine, run the Cottons 75 °C programme using Miele machine cleaner or powder detergent. The messages will appear at the end of the programme and when the washing... -
Page 52: General Problems With The Washing Machine
Problem solving guide General problems with the washing machine Problem Cause and remedy The machine shakes The machine feet are not level. during the spin cycle. Level the machine and adjust the feet correctly. The laundry has not The machine detected an imbalance during the final been spun properly and spin cycle and reduced the spin speed automatically. - Page 53 Problem solving guide General problems with the washing machine Problem Cause and remedy At the end of the The small pipe in the detergent dispenser drawer onto programme there is still which the capsule is placed is blocked. liquid in the capsule. ...
-
Page 54: An Unsatisfactory Wash Result
Use more detergent. Before washing the next load, run the Maintenance wash using Miele machine cleaner or a powder detergent. White residues which The detergent contained compounds (zeolites) to aid look like powder water softening which are not soluble in water. -
Page 55: The Door Will Not Open
Problem solving guide The door will not open Problem Cause and remedy The door cannot be The drum is locked during a programme. pulled open during a Press the Start/Stop button. programme. Use the sensor to select Cancel programme or Add laundry. -
Page 56: Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Failure
Switch off the washing machine. filter completely or take it right out. Place a suitable container, e.g. a Miele universal oven tray under the access panel. Open the drain pump access panel. Blocked drain outlet... - Page 57 Problem solving guide Opening the door Always make sure that the drum is stationary before reaching in to remove laundry. Reaching into a moving drum is extremely dangerous. Remove the drain filter completely. Use a screwdriver to unlock the door. ...
-
Page 58: After Sales Service
2 years from the date of purchase. – your Miele Dealer, or In the U.K. you must activate your cover – Miele (Contact details for Miele are by calling 0330 160 6640 or registering given at the end of this booklet). online at www.miele.co.uk. -
Page 59: Installation And Connection
Installation and connection Front view a Inlet hose (tested to withstand f Door pressure of at least 7,000 kPa) g Access to drain filter, drain pump and b Electrical supply cable emergency release c Flexible drain hose (with detachable h Four height adjustable feet swivel elbow) d Control panel e Detergent dispenser drawer... -
Page 60: Rear View
Installation and connection Rear view a Drain hose e Inlet hose (tested to withstand pressure of at least 7,000 kPa) b Transport clips for electrical supply f Safety caps for transit bars cable, inlet and drain hoses c Electrical supply cable g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when... -
Page 61: Installation Surface
2. then use a screwdriver to release the For this reason, if the machine is catches at the top and bottom. installed on a raised plinth (concrete or brick), it has to be secured against slippage using an MTS floor/plinth mounting kit (available from Miele). - Page 62 Installation and connection Using the spanner supplied, turn the Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then pull the transit bar out. pull the transit bar out.
-
Page 63: Re-Fitting The Transit Bars
Installation and connection To avoid the risk of injury, the holes for the transit bars must be covered after the transit bars have been removed. Secure the transit bars to the back of the washing machine. Make sure the top catch is located above the holder. -
Page 64: Levelling The Machine
Installation and connection Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. -
Page 65: Building Under A Continuous Worktop/ In A Kitchen Run
Installation and connection Building under a continuous Washer-dryer stack worktop/ in a kitchen run The washing machine can be combined with a Miele tumble dryer in a washer- The washing machine lid cannot dryer stack. The appropriate "WTV" be removed. -
Page 66: The Water Protection System
Installation and connection Electronic unit and washing machine The water protection system housing The Miele water protection system – Sump protects all parts of the washing Any leaking water is collected in a machine from water damage. sump in the base of the machine. A... -
Page 67: Connection To The Water Supply
Installation and connection Maintenance Connection to the water supply Only use a genuine Miele hose should The washing machine should be you ever need a replacement or connected to a mains water supply in extension. These are tested to accordance with current local and withstand pressure of at least national safety regulations. -
Page 68: Connection To The Drainage System
(up to a max. of 1.8 m) a replacement drain pump will need to be fitted. Adapter Please contact Miele or your Miele Dealer for advice. If necessary, the Nut drain hose can be extended to a length ... -
Page 69: Electrical Connection U.k
Installation and connection Non-rewireable plugs BS 1363 Electrical connection U.K. The fuse cover must be refitted when All electrical work should be carried out changing the fuse, and if the fuse cover by a suitably qualified and competent is lost, the plug must not be used until a person, in strict accordance with suitable replacement is obtained. -
Page 70: Consumption Data
Consumption data Load Energy Water Duration Residual moisture Litres h:min Cottons 90 °C 2.30 2:29 60 °C 1.35 2:29 60 °C 1.15 2:19 * 0.92 2:59 * 0.80 2:59 40 °C 1.10 2:39 * 0.60 2:59 20 °C 0.42 2:39 Minimum iron 30 °C 0.50 1:59 Delicates 30 °C 0.40... -
Page 71: Technical Data
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 100 kg Capacity 8 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating... -
Page 72: Settings
Settings Changing a setting You can use the settings menu to alter the machine's electronics to suit Touching the sensor will call up the changing requirements. different options for the setting. Settings can be altered at any time. The option which is selected will have a tick ... -
Page 73: Language
Settings Language Buzzer volume The display can be set to appear in You can select one of seven different one of several different languages. settings for the buzzer volume. The flag after the word Language acts The settings are represented by a bar as a guide to prevent a language which chart. -
Page 74: Code
The display will remain on. code. If you forget the code, the washing machine will need to be Factory default setting: the On (not in unlocked by Miele Service. current programme) option is selected. Temperature unit The temperature can be displayed as degrees Celsius (°C) or Fahrenheit (°F). -
Page 75: Machine Switch-Off
Settings Machine switch-off Display programme name The washing machine will switch off The name of the selected programme automatically after the end of the is shown briefly in the display. programme/anti-crease phase or after You can choose whether the being switched on if no further programme name is displayed or not. -
Page 76: Memory
If you require a longer pre-wash you high altitudes. In order to avoid water can extend the Cottons programme's boiling, Miele recommend activating standard pre-wash time of 25 minutes the reduce temperature setting at altitudes of more than 2000 m above Options sea level. -
Page 77: Water Plus
Settings Water plus Maximum rinse level You can increase the set amount of The water level in the rinse cycle can water in the wash programmes. be permanently set to the highest value. Options This function is useful for allergy –... -
Page 78: Low Water Pressure
Settings Low water pressure If the water pressure is less than 1 bar (100 kPa) the programme will be cancelled and the fault message Water will appear. intake See If the on-site water pressure cannot be increased, activating this function will prevent the programme from being cancelled. -
Page 79: Optional Accessories
– liquid detergent for delicates this washing machine. All the products – particularly suitable for woollen and have been designed for Miele washing silk garments machines. – cleans at temperatures as low as These and many other useful products 20 °C, helps retain the shape of... -
Page 80: Fabric Care
Optional accessories Down items Fabric care – liquid detergent suitable for pillows, Fabric care agents are available as sleeping bags and down filled items capsules in convenient single dose amounts or in a handy bottle. – retains the elasticity of down and feather filled items Reproofing agent –... - Page 83 Tel. +971 4 3044 999 Tel: (01) 461 07 10, Fax: (01) 461 07 97 Fax. +971 4 3418 852 E-Mail: info@miele.ie, Internet: www.miele.ie 800-MIELE (64353) Manufacturer: Miele & Cie. KG E-Mail: info@miele.ae Website: www.miele.ae Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 84 WKB 130 en-GB M.-Nr. 10 555 920 / 00...