Table of Contents
Advertisement
Problem solving guide
Unsatisfactory cleaning result
Problem
The crockery is not
clean.
There are smears on
glassware and cutlery.
There is a bluish sheen
on the surface of
glassware. The film can
be wiped off.
84
Possible cause and remedy
The items were not loaded correctly.
See notes under "Loading the dishwasher".
The programme was not thorough enough.
Select a more intensive programme (see
"Programme chart").
Activate the Extra clean function (see "Programme
options – Extra clean").
Activate the "2nd interim rinse" programme option
(see "Programme options – 2nd interim rinse").
Not enough detergent was dispensed during manual
detergent dispensing.
Use more detergent, or change your detergent.
Items are blocking the path of the spray arms.
Carry out a rotation check and, if needed,
rearrange the items so that the spray arms can
rotate freely.
The filter combination in the wash cabinet is not
clean or was incorrectly installed.
This may have caused the spray arm jets to become
blocked.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets if necessary (see
"Cleaning and care – Cleaning the spray arms").
The rinse aid dosage is set too high.
Reduce the dosage (see "Using for the first time –
Rinse aid").
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
