Table of Contents
Related Manuals for Miele TWD 660 WP
Summary of Contents for Miele TWD 660 WP
- Page 1 Operating instructions Heat pump tumble dryer It is essential to read these operating instructions before installing and using the appliance. This prevents both personal injury and damage to the appliance. en-AU, NZ M.-Nr. 12 127 420...
-
Page 2: Table Of Contents
Control panel ....................... 18 How the programme selector works ..............19 How the control panel works ................19 Before using for the first time ................21 Miele@home ......................21 Wash2Dry ....................22 Downtime after installation.................. 23 Energy saving tips ..................... 25 1. - Page 3 Contents Programme chart ....................35 Changing the programme sequence ............... 38 Changing a programme after it has started ............38 Adding or removing laundry ................38 Condensed water container ................39 Emptying the condensed water container ............39 Fragrance flacon....................40 FragranceDos ......................
- Page 4 Contents Installation......................60 Front view ......................60 Rear view......................61 Transporting the tumble dryer ................61 Transporting the tumble dryer to its installation site ........61 Installation ......................62 Levelling the dryer ..................62 Downtime after installation................63 Ventilation ....................... 63 Before moving the tumble dryer again (e.g.
- Page 5 Contents Network ....................... 85 Switching off Wi-Fi ..................85 RemoteUpdate ..................85 Remote control ..................87 SmartGrid (only functional in selected countries)........87 Copyright and licences for the communication module ........88...
-
Page 6: Caring For The Environment
Please dispose of it at your local community waste collection/recycling centre for electrical and electronic appliances, or contact Miele. You are also responsible for deleting any personal data that may be stored on the appliance being disposed of. Please... -
Page 7: Warnings And Safety Instructions
“Installation”, as well as in the “Warning and Safety instructions”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them... - Page 8 If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
- Page 9 It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
- Page 10 (e.g. on a ship). Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. This tumble dryer is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration).
- Page 11 - Disconnect the dryer from the electricity supply. - Air the room where the tumble dryer is located. - Contact Miele Customer Service. Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive if it leaks.
- Page 12 Warnings and safety instructions Correct use Warning: Risk of fire / Flammable materials. To avoid the possible danger of fire, please read these warnings carefully. A clogged filter is a fire hazard! The fluff filter must be cleaned after every programme. ...
- Page 13 Warnings and safety instructions The fluff filters must be cleaned after every drying cycle. Fluff must not be allowed to accumulate around the tumble dryer. The fluff filters and the plinth filter must be thoroughly dried after cleaning. Do not replace them if they are damp or wet. Damp or wet filters could cause operational faults.
- Page 14 Warnings and safety instructions When washing such heavily soiled items: Ensure that you use a larger quantity of detergent and select a high temperature. If in doubt, wash the items several times. To prevent the risk of fire, the following textiles must never be dried in the tumble dryer: - Textiles that have been cleaned using chemicals (e.g.
- Page 15 Warnings and safety instructions In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self- igniting).
- Page 16 Warnings and safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can run out of the flacon. Make sure that...
- Page 17 Miele cannot accept liability. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
-
Page 18: Operating The Tumble Dryer
Operating the tumble dryer Control panel a Control panel f Sensors for time selection b Sensors for the drying levels g Start/Add laundry sensor c Indicator lights for programme start and adding light up when necessary laundry... -
Page 19: How The Programme Selector Works
switched on by selecting a programme, and switched off by turning the programme selector to the position. MobileStart You can operate your tumble dryer remotely with the Miele App. Wash2Dry ... - Page 20 Operating the tumble dryer Indicator lights Time display - The remaining programme running time lights up when the condensed water is displayed in hours and minutes. container needs to be emptied. With most programmes, the duration - displayed may vary or "jump".
-
Page 21: Before Using For The First Time
Miele@home availability App. The ability to use the Miele App depends on the availability of the The Miele App will guide you as you Miele@home service in your country. connect your tumble dryer to your home Wi-Fi network. The Miele@home service is not Once your tumble dryer is connected to available in every country. -
Page 22: Wash2Dry
Miele washing Miele@home services. machine transfers the programme data via the router to which the Useful tip: Set up Miele@home as networked tumble dryer is also described in these operating connected, as well as transferring it to instructions. -
Page 23: Downtime After Installation
Logging in via the Miele App Removing the protective foil The Miele App can be used to connect and advertising stickers to your network. Remove: - the protective foil from the door (if present). - Page 24 Before using for the first time Logging in via WPS Follow the procedure for using for the first time outlined in Turn the programme selector to MobileStart . these instructions Touch the sensor until Refer to “1. Notes on correct laundry appears in the time display and a care”...
-
Page 25: Energy Saving Tips
Energy saving tips - If possible, make use of time- This dryer with heat-pump technology variable, low-cost electricity tariffs. is designed for energy-saving drying Ask your energy supplier for cycles. You can save even more information. Your tumble dryer's energy with the following measures, Delay start function will be useful as because the drying time is not you can select when during the next... -
Page 26: Notes On Correct Laundry Care
1. Notes on correct laundry care Points to note regarding Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the dryer and the surroundings. items, ensure that you use sufficient See “Warning and Safety detergent and select a high instructions”... -
Page 27: Drying
1. Notes on correct laundry care Care label symbols Drying Useful tip: See the "Programme chart". Drying It lists all programmes and their Normal/higher temperature maximum load. Reduced temperature* - Always observe the maximum recommended load for each * Select Gentle tumble programme. -
Page 28: Loading The Tumble Dryer
2. Loading the tumble dryer Socket for the fragrance flacon Loading the laundry See the section “Fragrance flacon” for Textiles may be damaged. information on how to use fragrance Before loading, read chapter “1. flacons. Notes on correct laundry care” first. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed. -
Page 29: Selecting A Programme And Starting It
The tumble dryer is not Turn the programme selector connected to the network to MobileStart . will light up in the time display. Touch the Start/Add laundry sensor. The tumble dryer can now be operated via a mobile device together with the Miele App. -
Page 30: Selecting A Drying Level With A Drying Programme
3. Selecting a programme and starting it Selecting a drying level with a Selecting timed drying drying programme programmes and other programmes Cottons, Minimum iron, Delicates, Shirts, Express, Bed linen Warm air/DryFresh The preset drying level for the You can set the duration in ten-minute programme can be changed if increments from minutes required. -
Page 31: Selecting Gentle Tumble
3. Selecting a programme and starting it Selecting Gentle tumble Laundry items and fabrics can wear out unnecessarily. Delicate fabrics (with the symbol on Avoid over-drying laundry and the care label, e.g. acrylic garments) garments. are dried at a lower temperature and with a longer programme duration. -
Page 32: Removing The Laundry At The End Of The Programme
4. Removing the laundry at the end of the programme End of programme/Anti-crease Always remove all items from the drum. End of programme: lights up in the Items left in the dryer could be time display and the Start/Add laundry damaged by overdrying when the sensor goes out. -
Page 33: Delay Start/Smartstart
Delay start/SmartStart Altering Delay start Selecting Delay start If you would like to alter the Delay start With Delay start you can delay the function after starting a programme, the start of a programme from function must be cancelled first. minutes up to ... -
Page 34: Smartstart
Delay start/SmartStart Setting the timeframe SmartStart If the SmartGrid programmable The SmartStart function (only available function is activated, the function of in selected countries) lets you define a the sensor changes. The time time period during which your tumble display no longer shows the Delay dryer will start automatically. -
Page 35: Programme Chart
Programme chart All weights marked with * are based on the weight of dry laundry. Cottons Max. load 8.0 kg* Items Cotton items such as those described under Cottons Normal with normal residual moisture. Notes Items are dried to a Normal level only. Cottons Max. - Page 36 Extra dry, Normal, Hand iron, Machine iron Items Bed linen, pillow cases. MobileStart The Miele App is used for selecting programmes and operating the machine. Wash2Dry The programme is selected automatically in conjunction with the programme selection on the connected washing machine.
- Page 37 Programme chart Proofing Max. load 2.5 kg* Items Fabrics suitable for tumble drying, e.g. microfibre fabrics, skiwear, outerwear, fine, close-weave cotton garments (poplin), and tablecloths. Notes - This programme only dries to the Normal level. - This programme includes a proofing fixing phase. - Only use proofing agents which are stated by the manufacturer as being "suitable for use on membrane textiles".
-
Page 38: Changing The Programme Sequence
Changing the programme sequence Changing a programme after it Adding or removing laundry has started You have forgotten an item of laundry, but the programme has already started. It is no longer possible to change the selected programme. This prevents the ... -
Page 39: Condensed Water Container
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying programme. The indicator will light up when the maximum level in the condensed water container is reached. -
Page 40: Fragrance Flacon
Fragrance flacon FragranceDos Removing the protective seal from the fragrance flacon Fragrance flacons (optional accessories) can be used to give your Only hold the fragrance flacon as laundry a pleasant scent. illustrated. Do not hold it at an angle or tip it as the fragrance will leak out. Useful tip: You can simply close the fragrance flacon if you want to dry ... -
Page 41: Inserting The Fragrance Flacon
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter next to the recessed grip. Markers and must line up with each other. Open the cover using the tab until the tab is right at the top as shown. -
Page 42: Opening The Fragrance Flacon
Fragrance flacon Opening the fragrance flacon Closing the fragrance flacon Before drying, you can select the After drying, the fragrance flacon should intensity of the fragrance. be closed to prevent the fragrance from escaping needlessly. Turn the outer ring clockwise: the ... -
Page 43: Removing/Replacing The Fragrance Flacon
- Always store in a cool, dry place packaging. away from direct sunlight. Fragrance flacons are available to - When purchasing new fragrance order from Miele or via the Miele flacons, only remove the protective online shop. seal just before use. -
Page 44: Cleaning And Care
Cleaning and care Pull the upper fluff filter forwards to Fluff filters remove it. This tumble dryer has 2 fluff filters in the loading area of the door. Both fluff filters trap fluff produced during the drying process. Clean the fluff filters after each drying programme. -
Page 45: Cleaning The Fluff Filters And Air Flow Openings Thoroughly
Cleaning and care Remove the fluff from the filter Turn the yellow dial on the lower fluff surface of all the fluff filters and the filter in the direction of the arrow (until perforated laundry deflector (see you hear it click). arrows). -
Page 46: Cleaning The Fluff Filters With Water
Cleaning and care Use a vacuum cleaner with a long crevice nozzle attached to remove any visible fluff from the upper air flow openings. Finally, clean the fluff filters with water. Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. -
Page 47: Cleaning The Plinth Filter
Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever the indicator light comes on or when the programme duration is longer than usual. To make the indicator light go out, open and close the door while the tumble dryer is switched on. -
Page 48: Cleaning The Plinth Filter
Cleaning and care Cleaning the plinth filter Fit the plinth filter back on the handle the right way round. Pull the handle out of the plinth filter. Clean the filter thoroughly under running water. Squeeze the plinth filter very carefully several times as you rinse it. -
Page 49: Cleaning The Plinth Filter Flap
Cleaning and care Cleaning the plinth filter flap Cleaning the dryer Disconnect the dryer from the electricity supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use solvents, abrasive cleaners, glass cleaners or all- purpose cleaners. -
Page 50: Problem Solving Guide
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call. - Page 51 Problem solving guide Problem Possible cause and remedy The indicator light The plinth filter looks clean after thorough cleaning. comes on. and However, the programme is terminated again and the continue to flash after a error message appears again. There are probably still programme has been deeper residues which could not be removed.
- Page 52 Start a programme. cancelled, a signal If the programme terminates again with the same sounds. error message, then there is a fault. Contact Miele. : lights up and the The laundry is unevenly distributed or has rolled up. programme has been ...
-
Page 53: Unsatisfactory Drying Results
Problem solving guide Unsatisfactory drying results Problem Possible cause and remedy The laundry is not The load consisted of different types of fabric. sufficiently dry. Finish drying using the Warm air/DryFresh programme. Select a more suitable programme next time. Useful tip: You can alter the drying levels for some programmes. -
Page 54: The Drying Process Takes A Long Time
Problem solving guide The drying process takes a long time. Problem Possible cause and remedy The drying process The room in which the tumble dryer is located is too goes on for too long or warm. even switches off.* Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters. -
Page 55: Other Problems
Problem solving guide Other problems Problem Possible cause and remedy There are humming The compressor is operating. noises. These noises are quite normal and do not indicate a fault. A programme cannot be There is no obvious cause. started. Connect the tumble dryer to the mains electricity supply ... -
Page 56: Replacing The Plinth Filter
Problem solving guide Deformations Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately (replacement filters are available as an optional accessory) if you see the following signs of wear before or after cleaning. Poor fit Deformations indicate that the filter has become worn. - Page 57 Problem solving guide Cracks, tears, indentations White residues or residues of other colours Residues arise from laundry fibres and residual detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crusts. Residues are a sign that the filter no longer has a snug fit at the sides, even if it appears to be perfect.
-
Page 58: Regenerating The Plinth Filter
Problem solving guide Regenerating the plinth filter Checking the heat exchanger You can regenerate one or more dirty Risk of injury from sharp cooling plinth filters in the washing machine. fins. The plinth filter will be ready for use You could cut yourself. -
Page 59: Service
Optional accessories In the event of any faults which you Optional accessories for this tumble cannot remedy yourself, please contact dryer are available from Miele (see Miele. contact details at the back of these instructions). You can book a Miele customer... -
Page 60: Installation
*INSTALLATION* Installation Front view a Mains connection cable e Heat exchanger access panel – do not open during drying b Control panel f Four height adjustable screw feet c Condensed water container g Cool air intake grille – empty after every drying cycle –... -
Page 61: Rear View
*INSTALLATION* Installation Rear view If the tumble dryer is being transported horizontally, it must only be tipped onto its left or right side. a Protruding lid for holding when If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a handcart or trolley, you must only... -
Page 62: Installation
If the tumble dryer is damaged, proceed operation. as follows: - Avoid naked flames or anything which creates a spark. - Disconnect the dryer from the electricity supply. - Air the room where the tumble dryer is located. - Contact Miele Customer Service. -
Page 63: Downtime After Installation
*INSTALLATION* Installation Downtime after installation The heat pump that is essential to the operation of this tumble dryer Damage to the tumble dryer by generates a lot of heat inside its switching it on too soon. casing. It must be possible to This can damage the heat pump. -
Page 64: Additional Installation Requirements
- Drying durations may increase slightly. Optional accessories – Washer-dryer stack The tumble dryer can also be combined with a Miele washing machine in a washer-dryer stack. The appropriate Miele washer-dryer stacking kit is required. -
Page 65: Externally Draining Condensed Water
*INSTALLATION* Installation Installation conditions requiring a Externally draining condensed non-return valve water Danger of condensed water Notes backflow. When drying is in progress, Water could flow back into the condensed water is pumped into the tumble dryer or be drawn into it. condensed water container through Backflow water could damage the the drain hose which is located at the... -
Page 66: Arranging The Drain Hose
*INSTALLATION* Installation Arranging the drain hose Examples Drainage into a laundry tub or floor gully Damage to the drain hose through incorrect handling. Use the hose holder to secure the drain hose. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked. - Page 67 *INSTALLATION* Installation Fit the adapter 1 to the sink drain Direct connection to a sink drain outlet outlet using the nut 2. Use the hose holder, the hose clips The nut is usually fitted with a washer and the non-return valve (available to which must be removed.
-
Page 68: Changing The Door Hinging
*INSTALLATION* Installation Hold the door securely and pull it Changing the door hinging forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its two pins out of the dryer. - Page 69 *INSTALLATION* Installation Turn the door lock through 180°. 3. Remove the lock catch from the door Press the door lock into the openings First take the rubber seal off the door on the opposite side of the door and place this to one side.
- Page 70 *INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Remove the lock catch from the cover. This lock catch cover is no longer needed. However, please keep it in a safe place.
- Page 71 *INSTALLATION* Installation 5. Change the door hinge on the door Useful tip: In some circumstances, the rods can be difficult to dislodge. The door hinge is secured to the door Moving the screwdriver with a levering with 2 angled rods. These rods need action while pulling at the same time to be removed with a screwdriver or may help to work the rods free.
- Page 72 *INSTALLATION* Installation 6. Change the lock catch on the door You now need the new door hinge cover supplied with the tumble dryer. You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
-
Page 73: Refitting
*INSTALLATION* Installation Refitting Now that you have changed the door hinging, the door will open from 7. Refit the door the opposite side. Press the rubber seal back into the groove on the door. Push the orange marker round to the other side so that you will see at ... -
Page 74: Electrical Connection
The tumble dryer is supplied with a a specific mains connection cable of mains cable with moulded plug ready the same type (available from Miele). for connection to a socket. For safety reasons, such replacement may only be carried out by a suitably... - Page 75 The protective measures provided in the domestic installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or replaced with equivalent measures in the installation.
-
Page 76: Technical Data
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Suitable for pushing under a worktop Height for pushing under a worktop 850 mm (+8/-2 mm) Width for pushing under a worktop 600 mm Depth for pushing under a worktop 600 mm Suitable for stacking Weight... -
Page 77: Consumption Data
Consumption data Final spin speed in a Residual Energy Duration Load domestic washing moisture machine min. Cottons 1,000 1.44 1,000 0.82 Cottons Normal 1,200 1.30 1,400 1.20 1,600 1.10 Cottons Normal 1,000 1.50 incl. Gentle tumble Cottons Hand iron 1,000 1.10 1,200... -
Page 78: Programmable Functions
Programmable functions Choosing and selecting Programming programmable functions You can use the programmable The number of the programmable functions to alter the dryer's function will appear in the display as electronics to suit your requirements. and a number: Programming is carried out by following e.g. - Page 79 Programmable functions Confirm your selection with the Start/ Editing and saving the programmable function Add laundry sensor. You can switch a programmable The number of the programmable function on or off or select different function, e.g. , will light up again. options.
-
Page 80: Cottons Drying Levels
Programmable functions Cottons drying levels Cooling temperature You can adjust the drying levels for the The laundry will be cooled to 55 °C Cottons programme to one of 7 before the end of the programme. It different levels. can be cooled to a lower temperature, but this will prolong the cooling phase. -
Page 81: Keypad Tone
Programmable functions Keypad tone PIN Code The tone that sounds when a sensor is The code prevents your machine pressed can be changed or switched being used without your knowledge. off. When the code has been activated, you Options have to enter the code after switching the dryer on. -
Page 82: Conductivity
Programmable functions Conductivity Control panel standby status This programmable function should only be altered if the water is so soft To save energy, the time display and that it is likely to cause the electronics the sensors will go out once the which sense residual moisture in the programme has been running for laundry to give false readings. -
Page 83: Memory
Programmable functions Memory Buzzer is active You can set the following: The The buzzer sounds to let you know the electronics will save the drying level programme has finished. It can be and any options selected for the switched on or off. -
Page 84: Airways Indicator
Programmable functions Airways indicator Backlight brightness dimmed Fluff must be removed after every drying programme. In addition, this The brightness of the dimmed sensors indicator will remind you to clean the in the control panel can be set to one filters when a certain amount of fluff of 7 different levels. -
Page 85: Network
This is the “Settings - Miele@home”) and you have only way to ensure that all personal an account in the Miele App. The dryer data has been removed and, in the must be registered in the App. See the... - Page 86 Postponing the update - Some software updates can only be After the tumble dryer is switched on, carried out by a Miele service appears in the time display. technician. Touch the sensor. The next time you switch on the appliance, you will be prompted to start the update again.
-
Page 87: Remote Control
Programmable functions Remote control SmartGrid (only functional in selected countries) You can use the Miele App to check the status of your tumble dryer from You can set your tumble dryer to start anywhere and start it remotely. You automatically based on an external can also control it remotely via the signal within a certain time period. -
Page 88: Copyright And Licences For The Communication Module
These items of software/software components are protected by copyright. The copyright powers of Miele and third parties must be respected. In addition, the communication module contains software components which are distributed under open source licensing terms. - Page 91 183 Featherston Street Miele Experience Centre South Melbourne: Wellington 6011 206-210 Coventry Street South Melbourne, VIC 3205 0800 464 353 (0800 4 MIELE) Miele Experience Centre and Office Sydney: www.miele.co.nz 3 Skyline Place Frenchs Forest, NSW 2086 Miele Experience Centre and Office Brisbane:...
- Page 92 TWD 660 WP en-AU, NZ M.-Nr. 12 127 420 / 00...