Page 2
Dear customer, Please read carefully right through this instruction booklet before installing or operating your dishwasher. The following instructions should prevent the risk of personal injury and/or damage to the appliance. Please keep these documents in a safe place for later reference. This operating manual has been written for several different machines, and some of the features mentioned here may not apply to your particular model.
TABLE OF CONTENTS 1 Getting To Know Your Program Steps Follow-up Canceling a Program Machine Changing a Program View of the Machine Programming the Delayed Start 2 Safety Instructions Salt Indicator Before Installation Rinse Aid Indicator Before First Use Rinse Aid Indicator Setting Child Safety Starting Your Machine Technical Specifications...
Getting To Know Your Machine View of the Machine �� � � �� � �� � � � � � �� � Upper dish basket with shelf �� Guide rail for the upper dish basket Salt container Cutlery basket Detergent dispenser Door Control panel Filters...
Technical Specifications our products, we may change our specifications and designs without prior Permitted water pressure: 0,3 –10 bar notice. (= 3 – 100 N/cm² = 0,01-1,0Mpa) Electrical connection: 220-240 Volts, Note for Testing Institutes 10 Amps (see type plate) The necessary information for Energy efficiency class “A”...
• The water in the dishwasher is not out by qualified customer service drinking water. Danger of caustic personel. • injuries. In the event of a problem, or before • Always place long and sharp/ performing a repair, disconnect the pointed objects (e.g.
Directions for Assembly Safety notes for installation Installing Your Dishwasher • Prior to installing and using your Choose a suitable location for your appliance, please check it for possible dishwasher. Take care to ensure transit damage. that the appliance is stable on a If the appliance is damaged, please level surface.
Water connection AQUASAFE+ (depending on the model) Permitted water temperature: up to The AQUASAFE+ System protects 25°C against water damage which may be • caused at the water inlet hose. The dishwasher may not be connected to open warm water Do not immerse the system’s valve devices or flow-through water box into water;...
Water drainage Extension hoses If a hose extension is required, a Connecting the drainage hose. drainage hose of equal quality must be used. Take care to ensure that the drainage hose is not bent or squeezed. The maximum length must not exceed 4m.
the product, it’s packaging or in the Packaging materials may be manual. dangerous to children. Reusable substances may be dropped off at your Materials used are recyclable local disposal facilities. You may obtain according to their labelling. Reuse, further information from your local recycling of materials and further authorities and disposal facilities.
When operating for the first � time: • Pour 1 litre of water into the salt container (Fig. C). • Pour the salt into the container with the aid of the salt funnel provided (Fig. D). • Pour in enough salt to fill the container.
Filling the Rinse Aid Dispenser Rinse aids allow washing water to rinse off more cleanly and prevent watermarks or streaks on the dishes. Only use rinse aid designed for use in dishwashers. If you use “2 in 1” or “3 in 1“ 1013 �...
Detergent The detergent container holds a total of 40 cm³ of detergent (1). Please use detergents produced specially for the dishwashers in your When the dishwasher is fully loaded machine. and the dishes are very dirty, we recommend filling the detergent Keep the opened detergent packages container up to the 25 cm³...
Excessive usage of powder detergents the washing program is over. can cause the detergent not dissolve completely and can also cause When you give up using such scratches on the glassware. detergents: Multipurpose Detergents Make sure that salt and rinse aid compartments are full.
2 folding plate support rods horizontally into the upper basket due to risk of injury. (depending on the model) There are two separate “folding plate Please do not overload your support rods” in the lower basket of your dishwasher and pay attention to the dishwasher designed to allow you more notes regarding dishes which are suited space to accommodate saucepans and...
Cutlery basket Rack 1029 1024 Loading suggestions Load the upper basket with dessert plates, cups, glasses etc. 1028 15 GB...
Page 17
Height setting with empty basket (depends on the model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right � and left tracks of the upper basket by pushing them outwards (C).
Adjusting the height of loaded To lower the basket: 1. Press the latch on the basket upper basket adjustment mechanism (right or (depends on the model) left) to lower the basket (B). Basket adjustment mechanism on 2. Repeat the same process to lower the upper basket of the machine is the other side of the basket.
Button and Button selection button. Number of the defined programs can change depending on Descriptions the model you have purchased. On / Off Button (1) When you press the On/Off button, Half Load / Tablet Detergent Button the display switches on with the last program used and it dims when you Half Load / Tablet Detergent Button turn the machine off.
selecting the desired programme until change depending on the model you Half Load Indicator lights up, then have purchased). The selected press Start / Pause / Cancel button and washing program will start running close the door of your machine. when the Start / Pause / Cancel button (2) is pressed symbol (12) light up.
b Drying Step Indicator (15 b) start from the rinsing step). If you want c End of Program Indicator (15 c) to run the newly selected program from the beginning, you have to apply the The display shows the steps for program cancellation process first and washing 15 a and drying 15 b, then select a new program.
Rinse Aid Indicator and Table of Average Consumption Values. Resume the delayed start Check the rinse aid warning display countdown by pressing the Start / (10) on the screen to find out if there Pause / Cancel button (2). is sufficient amount of rinse aid in your machine.
• Starting Your Machine End of Program indicator (15 c) • will light up. Plug the mains plug into the wall • Turn off your machine by pressing socket. • On / Off button (1). Open the tap. • • Close the tap.
How to clean your dishwasher Cleaning your machine at regular Do not operate your dishwasher intervals ensures longer product life without a filter. Ensure that your filters and reduces the risk of reccurring are correctly installed. Clean the filters problems. regularly.
Cleaning the spray arms Cleaning the filter inset in the water inlet hose (depends on the model) Dirt or calcium residue may block the Dirt from deposits in the water pipes is nozzles on the spray arms. For this prevented by a filter in the water inlet reason, regularly check the spray hose.
Troubleshooting: What to do if the dishwasher will not run • Check that the mains plug is properly connected. • Are all fuses working? • Is the water supply fully turned on? • Is the dishwasher door closed firmly? • Have you pressed the On/Off button? •...
Page 29
Inadequate rinse aid Increase rinse aid setting or add rinse aid into rinse aid compartment. Unsealed detergent dispenser lid Always ensure that the detergent compartment lid is closed tightly after every detergent filling process. Drying Disorderly placement ...
Page 30
1035 Lime Stains, Hazy Look Inadequate rinse aid Increase rinse aid setting or add rinse aid into rinse aid compartment. Insufficient water softening In products equipped with water softening setting, water softening should be properly set in accordance with the hardness of the supply water. Add salt into the salt container, if necessary.
Page 31
1041 Scratch / Break In Glassware Kitchenware containing Aluminum Kitchenware that contains aluminum should not be washed in dishwashers. Salt leakage* Use the supplied salt funnel while filling in softening salt. Make sure that the salt box cover is tightly closed after finishing the filling process. Run a washing program to clean up the salts spilled in the machine.
Page 32
1038 Detergent Remains In The Detergent Dispenser Damp detergent compartment Make sure that the detergent dispenser is well dried prior to filling it with detergent. Putting detergent in the detergent dispenser long before washing Take care that detergent is put shortly before startup of washing. Blocking the opening of detergent dispenser lid dwing washing ...
Page 33
Leaving the dishes in the dishwasher for a long time If you are not going to run your dishwasher immediately, load the dishes into your machine after scraping the excessive soil on them and do not tightly close the door of the machine. Every other day, perform washing without detergent in the shortest program for products with program selecting feature.
Service If your appliance ever malfunctions, check the notes and advice given in the operating manual. If this does not fix the problem, our customer service staff are available to assist you. 33 GB...