Correct use Switch off at the wall socket and remove the plug. The Miele Electrobrush is a motor driven accessory appliance for use Do not let the appliance get wet. only with Miele vacuum cleaners. It...
Page 3
Warning and Safety instructions Blocked roller warning light Never touch the roller brush while The indicator light on the Electrobrush it is rotating. Danger of injury. has two functions. Do not use the Turbobrush at head The light is level. Long hair, ties, scarves etc. –...
These operating instructions are for Electrobrush models: – Floor surfaces with a variable or uneven profile. The brush might 1. SEB 217 for hand-held vacuum come into contact with the floor cleaners and and cause damage. 2. SEB 215 / SEB 216 for cylinder –...
Connecting the Electrobrush Cable to the vacuum cleaner When the Electrobrush is connected to a cylinder vacuum cleaner, the cable Connect the Electrobrush to the must be secured to the telescopic tube vacuum cleaner as shown in the and to the suction hose. Nine clips are illustrations at the end of the operating supplied for this: instructions.
With a new roller brush: appliance. Please contact your Fit the supports so that the single notch Miele dealer, or the Miele Spare points towards the roller cover, (see left Parts Dept. hand illustration). The bristles protrude approx.