Buzzers - Miele HG07 Operating Instructions Manual
Hide thumbs
Also See for HG07:
- Operating instructions manual (96 pages) ,
- Operating instructions manual (92 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Buzzers
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault.
The buzzers at the end of a program
and the alarm tone in the event of a
fault will sound four times at intervals
with a short pause between each set.
The buzzers are switched off as
standard.
You can switch on the buzzers that
sound at the end of a program if you
wish. The alarm tone that sounds in the
event of a fault is always switched on.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the button in and, while
holding it in, turn the dishwasher on
using the button.
Keep the button pressed in for at
least 4 seconds until the indicator
light comes on.
If this does not happen, start the
procedure from the beginning again.
Program options
Press the Program button 4 times.
The top left program indicator light will
flash rapidly 4 times at intervals.
The flashing sequence in the time
display indicates whether the buzzers at
the end of the program are activated or
deactivated:
- : buzzers are activated
- : buzzers are deactivated
Press the button to change the
setting.
The setting is now saved.
Turn the dishwasher off with the
button.
45
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
