Fault Messages After A Programme Has Been Cancelled - Miele WWI 860 Operating Instructions Manual
Hide thumbs
Also See for WWI 860:
- Operating instructions manual (112 pages) ,
- Operating instructions manual (96 pages)
Table of Contents
Advertisement
Fault messages after a programme has been cancelled
Problem
Check drainage. See
Water intake. See
Service
Waterproof syst.
Turn off
Service Fault F
To switch off the fault message: Turn the programme selector to the position to
switch the washing machine off.
Possible cause and remedy
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the filters and the drain pump.
The maximum drain height is 1 m.
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The drain pump is activated for 2 minutes. The washing
machine door is then released. Wait for the drain pump
to stop before switching the machine off.
The water protection system has reacted.
Turn off the tap.
Call Miele.
There is a fault.
Disconnect the washing machine from the
electricity supply. Switch off at the wall and
withdraw the plug from the socket, or switch off
the mains circuit breaker.
Wait at least 2 minutes before reconnecting the
washing machine to the electricity supply.
Then switch the washing machine on again.
Restart the programme.
If the fault message appears again, contact Miele.
Problem solving guide
69
Hide quick links:
Advertisement
Table of Contents
