115/230 VAC Digital Input Module – OHDI-01 Safety WARNING! All electrical installation and maintenance work on the drive should be carried out by qualified electricians only. WARNING! The drive and adjoining equipment must be properly grounded. WARNING! Do not attempt any work on a powered drive. After...
• Up to three 230 VAC inputs Module Layout OHD4 Low Voltage Side High Voltage Side 24 VDC 115/230 VAC Outputs (6) Digital Inputs Compatibility The OHDI-01 is compatible with all ACS550, ACH550 and ACS800 drives. Installation Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...
115/230 VAC Digital Input Module – OHDI-01 Installing the Module Delivery Check The option package contains: • OHDI-01 module • Two mounting screws • This manual Mounting WARNING! Follow the safety instructions given in this guide and in the drive manual: ACS800 Hardware Manual, ACS550 User’s Manual or ACH550 User’s Manual.
Page 6
To determine the proper routing for wiring, refer to the following sources: • Either the "Terminal Designations – 115 VAC" section, or the "Terminal Designations – 230 VAC" section below for the OHDI-01 module’s terminal designations. • The drive’s terminal designations in the appropriate manual: - ACS550 User’s Manual...
Page 8
115/230 VAC Digital Input Module – OHDI-01 Terminal Designations – 115 VAC Use the following table for reference when wiring terminals. Identification Typical Connection Digital Input Terminal Low Voltage Side ACS550 / ACH550 ACS800 24 V 10 (+24V) 7 (24V)
Page 9
115/230 VAC Digital Input Module – OHDI-01 Terminal Designations – 230 VAC Use the following table for reference when wiring terminals. Identification Typical Connection Digital Input Terminal Low Voltage Side ACS550 / ACH550 ACS800 24 V 10 (+24V) 7 (24V)
115/230 VAC Digital Input Module – OHDI-01 Technical Data Dimensions Module dimensions are: Ref. OHD7 Enclosure OHD5 Degree of Protection The module is mounted inside the drive enclosure. Refer to the drive’s rating. Ambient Conditions The module is mounted inside the drive enclosure. Refer to the drive’s requirements.
Page 11
115/230 VAC Digital Input Module – OHDI-01 Specifications Module Specifications • Module is UL/CUL-approved. • Module complies with EMC standards EN 50081-2 and EN 50082-2. • Input voltage: 115 to 230 VAC +10% • Max. current leakage in digital off state: 2 mA.