Table of Contents
Related Manuals for Miele PDR 908 EL
Summary of Contents for Miele PDR 908 EL
- Page 1 Operating and installation instructions Vented dryer Always read the operating instructions before assembly, installation and commissioning of the machine. This prevents both personal injury and damage to the machine. en-GB M.-Nr. 11 115 170...
-
Page 2: Table Of Contents
Contents Caring for the environment ................. 7 Warning and Safety instructions ................. 8 Operating the tumble dryer ................ 19 Fascia panel ......................19 Sensors and touch display with sensors............... 20 Main menu......................20 Examples of how to operate the appliance............21 Operating a launderette machine ................ - Page 3 Contents Programme overview .................. 36 Label........................36 Programme packages ................... 37 Standard........................ 37 Sport........................41 Soft furnishings ..................... 42 Hygiene ......................... 43 WetCare......................... 44 Flatwork......................... 44 Special programmes ..................... 45 Changing the programme sequence .............. 46 Changing a programme once it has started............46 Cancelling a programme ..................
- Page 4 Contents Locations....................... 61 Side view ......................61 Steel plinth......................61 View from above....................61 Washer-dryer stack ..................61 Transporting the tumble dryer to its installation site ..........62 Installation ......................63 Levelling the tumble dryer ................63 External control equipment ................63 Electrical connection .....................
- Page 5 Contents Supervisor level .................... 74 Accessing supervisor level ..................74 Access via code ....................74 Change code ......................74 Closing the settings menu..................74 Controls / Display ....................74 Language......................74 Language entry ....................75 Set languages....................75 Display brightness.................... 75 Clock display....................
- Page 6 Contents External applications ..................... 86 External exhaust flap ..................86 Additional fan ....................86 Pressure sensor....................86 Peak load signal ....................87 Peak load prevention..................87 COM module selection..................87 WiFi........................88 Network time ....................88 Remote ......................89 Remote Update ....................89 SmartGrid ......................
-
Page 7: Caring For The Environment
/ recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal. -
Page 8: Warning And Safety Instructions
Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner. - Page 9 If using, do so at your own risk, and follow the in- structions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from in- correct or improper use or operation.
- Page 10 It is essential that this standard safety re- quirement is met. If in any doubt, please have the on-site wiring sys- tem inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
- Page 11 Warning and Safety instructions If the electrical connection cable is faulty it must always be re- placed by a Miele authorised service technician to protect the user from danger. Faulty components must only be replaced by genuine Miele ori- ginal spare parts.
- Page 12 This special lamp must only be used for the purpose for which it is intended. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or by Miele Service.
- Page 13 Warning and Safety instructions Correct use The maximum load for this tumble dryer is 8 kg (dry weight).The maximum recommended loads for individual programmes are given in the Programme chart. Do not lean on the door. Otherwise, the tumble dryer may tip over, causing injury to yourself or others.
- Page 14 Warning and Safety instructions The ducting must never be installed in any of the following flues or shafts. – Chimneys or smokestacks that are in use. – Shafts that are used to ventilate installation rooms with fireplaces. – Flues that are used by third parties. Smoke or exhaust gas that is fed back into the flue or shaft may be toxic.
- Page 15 Warning and Safety instructions Regularly check all components in the ducting (e.g. wall pipe, ex- ternal grille, bends, elbows, etc.) to make sure air can move through them and to ensure that they are working properly. Clean compon- ents when necessary. Fluff deposits in the ducting system will pre- vent the air from being extracted properly and, as a result, will stop the tumble dryer from working properly.
- Page 16 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – items which have not been washed. – Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other depos- its (such as cosmetics, lotions etc).
- Page 17 (e.g. a timer or a peak-load switch-off device). The tumble dryer may only be operated with a peak-load device if this is connected to the tumble dryer via the Miele XCI box and the relevant settings have been configured on the tumble dryer.
- Page 18 Only use genuine Miele original spare parts and accessories with this appliance. If spare parts or accessories from other manufactur- ers are used, this will invalidate the guarantee, and Miele cannot ac- cept liability. The tumble dryer can also be combined with a Miele washing ma- chine in a washer-dryer stack.
-
Page 19: Operating The Tumble Dryer
Operating the tumble dryer Fascia panel a Language sensor e Optical interface For selecting the current user lan- For service technicians. guage. f Button The operating language is displayed For switching the tumble dryer on again at the end of the programme. and off. -
Page 20: Sensors And Touch Display With Sensors
Operating the tumble dryer Sensors and touch display with Main menu sensors After switching on the tumble dryer, the main menu will appear in the display. The sensors , and Start/Stop and the sensors in the display respond You can access all the important sub- to finger tip contact. -
Page 21: Examples Of How To Operate The Appliance
Operating the tumble dryer Extras menu (multiple choice) Examples of how to operate the appliance Extras 11:02 Option lists temperature Programme menu (single option list) Programmes 11:02 Anti-crease Cottons Express Shirts Touch one or several Extras to select it/ Minimum iron Delicates Denim... - Page 22 Operating the tumble dryer Pull-down menu Tip: For some settings, depending on the value range and increments, the The pull-down menu can be used to value can also be set using a numerical display information, e.g. about a drying keypad. Briefly touching a number will programme.
-
Page 23: Operating A Launderette Machine
Operating the tumble dryer Symbols on the display Operating a launderette ma- chine Drying levels The entry menu will vary depending on Extra dry the programming status (see “Con- Normal plus trols” under “Supervisor level”). Normal Shortcuts are the easiest way to oper- ... -
Page 24: Initial Commissioning
After that, they must be changed The selected language will be high- by Miele Service. lighted in orange and the display will These settings are also described under change to the next setting. -
Page 25: Reference To External Appliances
Initial commissioning Reference to external appli- Setting the date ances Date A reference to external hardware ap- 2021 pears. June 2020 Confirm with the July 2019 sensor. Before initial commissioning, connect August 2018 the XCI box or slide a communication September module into the slot on the back of the tumble dryer. -
Page 26: Selecting Programme Packages
Initial commissioning Confirm time request Selecting programme pack- ages The following question appears in the display: You can select various programmes from the programme packages. Should the clock display not be shown? Any programmes already active are Touch the sensor. -
Page 27: Completing Commissioning
Basket - Low commissioning process, please contact Microfibre cool air temperature Miele Service. If you do not wish to set up a payment system, you can skip this stage. Select the Timed drying cool air pro- gramme. Payment system 11:02 ... -
Page 28: Notes On Correct Laundry Care
1. Notes on correct laundry care – Sew in or remove underwiring from Washing bras. – Heavily soiled laundry must be washed particularly thoroughly. Use Care label symbols sufficient detergent and select a high temperature. If in doubt, wash the Drying items several times. -
Page 29: Load The Tumble Dryer
2. Load the tumble dryer Loading the laundry Closing the door Preventing textile damage. Before loading, read chapter “1. Notes on correct laundry care.” Shut the door with a gentle swing. Open the door. Load the laundry. Preventing textile damage. -
Page 30: Selecting A Programme
3. Selecting a programme Switch on the tumble dryer Alternatively, you can select a pro- gramme via: Favourites*. Press the control. * The preset programmes under The drum lighting will come on. cannot be changed. vourites The drum lighting will automatically go ... -
Page 31: Selecting Programme Settings
De- * The time frame for the selected pro- pending on the programme, you can gramme duration can be limited by select different drying levels. Miele Service. Overview 11:02 – Timed drying warm air = 0:20–... -
Page 32: Selecting Extra Options
4. Selecting programme settings Low temperature Selecting extra options Delicate fabric (with the symbol on The drying programmes can be aug- the care label, e.g. acrylic garments) is mented with various extra options. dried at a lower temperature. The pro- ... -
Page 33: Starting The Programme
5. Starting the programme Payment systems Programme duration/Estim- ated time remaining Tip: If your machine is connected to a payment system, the amount of pay- The programme duration depends on ment required will appear in the display. the quantity of laundry, the type of fab- ric and the residual moisture in the Once the programme has started, do laundry or also the water hardness. -
Page 34: End Of Programme - Unloading The Drum
6. End of programme – unloading the drum End of programme Unloading the drum The laundry will be cooled down shortly before the end of the programme. The laundry can be unloaded. – Finish lights up If Anti-crease * was selected, the drum will rotate in intervals. -
Page 35: Timer
Timer Deleting the timer The Delay start must be activated in the Supervisor level so that the timer The selected delay start period can be can be selected. cancelled before the programme starts. Before the programme starts, the Touch the , or sensor. Timer can be used to select a pro- gramme start time or programme end The selected delay start period will ap-... -
Page 36: Programme Overview
Programme overview All weights marked with * are based on the weight of dry laundry. Label Cottons Eco maximum 8 kg* Items Cotton items such as those described under Cottons Normal with normal residual moisture. Note – Items are dried to a Normal level only in this programme. –... -
Page 37: Programme Packages
Programme overview Programme packages You can select various programmes from the programme packages. The pro- grammes will appear in the programme list. Standard Cottons maximum 8 kg* Extra dry, Normal plus, Normal Items – Single and multi-layered cotton items. – Towelling, T-shirts, underwear, jersey bed linen, baby clothes. –... - Page 38 Programme overview Delicates Max. load 4 kg* Normal plus, Normal, Hand iron plus Use for – Delicate synthetic, cotton or mixed fibre fabrics. – Lightweight pullovers, dresses, trousers, overalls, table cloths, shirts and blouses. – Lingerie and appliquéd fabrics. Note Less creasing occurs in this programme. Reducing the load will reduce creasing even further.
- Page 39 Programme overview Towelling Max. load 8 kg* Use for Large quantities of single-layered and multi-layered towelling items. These include, for example, towels, bath robes, face flannels, flannel bed linen. Note Items are dried to a Normal plus level only in this programme. Smoothing Max.
- Page 40 Note – These programmes may only be used with the Miele dryer basket (optional accessory). – A satisfactory drying result cannot be achieved without the dryer basket.
-
Page 41: Sport
Programme overview Sport Sportswear Max. load 3 kg* Use for Sportswear that is suitable for drying in a tumble dryer. Note Items are dried to a Normal level only in this programme. Outerwear Max. load 2.5 kg* Normal, Hand iron plus Use for Outerwear which is suitable for tumble drying. -
Page 42: Soft Furnishings
Programme overview Soft furnishings Down bedding Max. load 2 kg* Use for Bedding suitable for tumble drying (duvets or pillows filled with down or feathers). Note Items are dried to a Normal level only in this programme. Feathers have a tendency of developing a strong odour when they are warm. -
Page 43: Hygiene
Programme overview Hygiene In the hygiene programmes, items will be dried with a temperature that is con- stant over an extended period (longer temperature holding time). This kills off micro-organisms such as germs or dust mites and reduces allergens in the laundry. -
Page 44: Wetcare
Programme overview WetCare WetCare Sensitive maximum 2.5 kg* Items Non-washable outerwear Note The garment is briefly dried and fluffed up WetCare Silks maximum 2.5 kg* Normal, Hand iron plus, Hand iron Items Non-washable silk garments which crease easily WetCare Intensive maximum 2.5 kg* Normal plus, Normal, Hand iron plus, Hand iron, Machine iron Items Washable outerwear Flatwork Cottons 40 % residual moisture... -
Page 45: Special Programmes
Programme overview Special programmes – You can put together five special pro- – grammes and assign your own pro- gramme names. Enter these into the – tables. – Load: maximum 8 kg (weight of dry – items) – Example – [Special programme 1] Dry+ Res. -
Page 46: Changing The Programme Sequence
You could burn yourself. * Either during the commissioning pro- Let the laundry cool down and re- cess or subsequently, a Miele service move it carefully. technician can reset the payment sys- tem so that programming changes can ... -
Page 47: Cleaning And Care
Cleaning and care When to clean Clean when the following instruction appears on the display: A two-piece fluff filter in the air supply Clean airways Clean the filters area collects all fluff generated during the drying process. Failure to clean the filter regularly could increase drying times. -
Page 48: Dismantling The Fluff Filter
Cleaning and care Cleaning the fluff filter components when dry Tip: Use a vacuum cleaner to achieve the best possible cleaning results. Use the handle to pull out the fluff fil- ter. Dismantling the fluff filter Use your fingers or a vacuum cleaner to wipe fluff off the filter. -
Page 49: Cleaning The Air Supply Area
Cleaning and care Cleaning the air supply area Open the door. Fluff can be removed with a vacuum cleaner. The round lid (D) serves no purpose and cannot be removed. The fan wheel inside the tumble dryer Pull out the cover to the air supply may be clogged with detergent area. -
Page 50: Assembling And Fitting The Fluff Filter
Cleaning and care Use a damp cleaning cloth to remove any fluff. Make sure that you do not Insert the inner fluff filter component damage the rubber seal when doing into the outer component (1). this. Turn the inner section of the fluff filter Assembling and fitting the fluff filter clockwise (2) slightly until you feel it engage. -
Page 51: Cleaning The Tumble Dryer
Cleaning and care Clean the tumble dryer and the seal Close the fluff filter flap. on the inside of the door with a The filter must be inserted and the slightly damp soft cloth and a mild fluff filter flap must be closed to en- solution of washing-up liquid and wa- sure the system is correctly sealed ter. -
Page 52: Problem Solving Guide
The tumble dryer can be permanently disabled by this safety feature. If this happens, contact the Miele Customer Service Department. Follow the cleaning instructions in the “Cleaning and ... - Page 53 Note the message on the display. fails, call Service lights up after a Touch the sensor. programme has If the programme terminates again with the same er- been cancelled. ror message, then there is a fault. Contact Miele Ser- vice.
- Page 54 Problem solving guide Message Cause and remedy The laundry is unevenly distributed or has rolled up. Obstruction detec- Open the door and loosen the laundry. Take out ted. Untangle laun- dry and restart some of the laundry if necessary. lights up after a ...
-
Page 55: Unsatisfactory Drying Results
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not suffi- The load consisted of different types of fabric. ciently dry. Finish drying using the Timed drying warm air pro- gramme. Large items of laundry The laundry could not be disentangled in the pro- have rolled up, causing gramme you selected. -
Page 56: The Drying Cycle Duration Is Very Long
Problem solving guide The drying cycle duration is very long Problem Cause and remedy The drying process In some circumstances, you may be asked to clean goes on too long or the air channels/filters. even switches off.* Check for all of the possible causes described be- low. -
Page 57: General Problems With The Tumble Dryer
Problem solving guide General problems with the tumble dryer Problem Cause and remedy Condensation is form- The tumble dryer is installed on a shared exhaust air ing in the drum. duct. The tumble dryer must always be installed with a non-return flap when using a shared exhaust air duct. -
Page 58: Service
Optional accessories for this tumble cannot remedy yourself, please contact dryer are available from your Miele your Miele Dealer or Miele Service. Dealer or from the Miele Spare Parts Department. Contact information for Miele Service can be found at the end of this docu- ment. -
Page 59: Installation
*INSTALLATION* Installation Front view a Mains connection cable e 4 height-adjustable screw feet b Control panel f Intake for air cooling c Door g On-site ducting (installed on the right or left-hand side) d Fluff filter Do not open the cover during active programme operation. -
Page 60: Rear View
*INSTALLATION* Installation Rear view a Interface for communicating with ex- d Module slot (for external communica- ternal devices tion module) b Mains connection cable e Exhaust air connections – Any exhaust air connections not in c Recesses under the protruding lid for use must be sealed with a cap. -
Page 61: Locations
All measurements in mm Side view 1131 1100 Washer-dryer stack min. 300 Steel plinth 1702 A stacking kit* is needed. This must be fitted by a Miele authorised service technician. Steel plinth* (open or closed bases) * Miele accessory available to order... -
Page 62: Transporting The Tumble Dryer To Its Installation Site
*INSTALLATION* Installation Transporting the tumble dryer to its Transporting the tumble dryer installation site to its installation site Danger of injury due to unsecure Damage caused by incorrect lid. transportation of the tumble dryer. The fixings at the back of the lid If the tumble dryer tips over, there is could break as a result of external a danger of injury to people and... -
Page 63: Installation
This tumble dryer can be fitted with a payment system (optional Miele ac- cessory). In this case, a Miele Service technician must programme the relev- ant settings in the tumble dryer's elec- tronics and connect the payment sys- tem. -
Page 64: Electrical Connection
Conversion must be performed by The tumble dryer may only be connec- Miele Service or by an authorised ted to a permanent electrical system Miele Service dealer. that conforms to the national and local codes and regulations. - Page 65 *INSTALLATION* Installation The user has to ensure that this device is connected only to a power supply system which fulfils the requirement above. If in doubt, please ask your elec- trical distributor for actual impedance value.
-
Page 66: Installation Of The Ducting
*INSTALLATION* Installation of the ducting General principles concerning General principles concerning exhaust air management the air supply The air drawn into the appliance for Damage caused by incorrectly the drying process is extracted from installed or missing ducting. the ambient air. You must therefore Moist air from the tumble dryer can ensure that the room is sufficiently cause damage in the room where the... -
Page 67: Calculating The Total Ducting Length
*INSTALLATION* Installation of the ducting Calculating the total ducting Table I length Components Relat- The entire ducting system (including pipe bends and components) generates air length resistance that pushes against the ex- Exhaust air hose (highly flexible)* haust air. The relative pipe lengths and total ducting length have to be calcu- 1 m, laid straight 1.8 m... -
Page 68: Exhaust Air Outlets On The Back Of The Tumble Dryer
*INSTALLATION* Installation of the ducting Sample calculation Turn the cap to the left to remove it. Press the cap firmly into the open air outlet. Wall pipe, with inserted grille = 1 x 3.8 m relative pipe length = 3.8 m Dimensions of the exhaust air outlets B/D 2 bends, 90°... -
Page 69: Installing Plug-In Pipes
– A wall pipe* or a window connection* (*optional accessory) a Wall pipe (installation instructions – A plastic waste water pipe from a are provided with the Miele wall specialist retailer. If the required pipe pipe) diameter is over 100 mm, additional... -
Page 70: Installing Flexible Hoses
*INSTALLATION* Installation of the ducting Flat ducting Installing flexible hoses Use the flat ducting* to install the ex- You can install an exhaust air hose haust air hose* onto the tumble dryer if with the help of an adapter* or flat there is no space to install it to the ducting*. -
Page 71: Examples
Connection to a ventilation stack a Window connection (inserted in a pane of Perspex) a Pipe with connector b Adapter for a flexible exhaust air (= individual parts in the Miele wall pipe) hose b Adapter for a flexible exhaust air hose c Ventilation stack, moisture-proof ... -
Page 72: Technical Data
Technical data Height 850 mm Width 596 mm Width (only for machines with a stain- 605 mm less steel lid) Depth 717 mm Depth with door open 1131 mm Weight 52 kg Drum volume 130 l Load size 8 kg (weight of dry laundry) Length of connection cable 2000 mm Supply voltage See data plate on back of machine... -
Page 73: Conformity Declaration
Technical data Conformity declaration Miele hereby declares that this vented dryer complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: – Products, Download from www.miele.co.uk – For service, information, operating instructions etc: go to www.miele.co.uk/do- mestic/customer-information-385.htm and enter the name of the product or the... -
Page 74: Supervisor Level
Be careful when entering a new displayed again at the end of the pro- code. gramme. You will need to inform Miele Service if you forget your new code. Miele Service will have to reset the code. Make a note of your new code and... -
Page 75: Language Entry
Supervisor level Language entry Set languages The display can be set to one of sev- The languages for the setting Lan- eral different user languages. This set- guage entry International can be ting allows you to determine how lan- changed. guages can be selected. Six languages can be selected. -
Page 76: Clock Display
Supervisor level Clock display Volume After selecting the clock format, you The volume for various sounds can be can set the time of day. changed. Clock format The volume can be changed. – Factory default: 24-hour display – Finish tone –... -
Page 77: Display" Off Status
Supervisor level "Display" off status "Machine" off status The display switches off to save en- In order to save energy, the tumble ergy; only the Start/Stop sensor dryer will switch off automatically after flashes slowly. You can change this the end of the programme or if no fur- setting. -
Page 78: Memory
Supervisor level Memory Logo The tumble dryer saves the settings You can choose whether the “Miele that were last selected for a drying Professional” logo or your own logo programme (drying stage and/or extra appears in the display. option, or the duration for some pro-... -
Page 79: Programme Selection
Supervisor level Opening the Supervisor level (launder- Programme selection ette version) Controls Switch the tumble dryer on and open the dryer door. You can select whether the tumble dryer is operated as a “launderette” Touch the Start/Stop sensor and machine. -
Page 80: Programme Packages
Supervisor level – Standard – Launderette basic int. time Factory default: All (selected) pro- Four timed programmes* with differ- grammes are available. ent temperature levels are time-con- trolled via the tumble dryer electron- – Launderette, basic (4 prog) ics. The maximum laundry weight is Four programmes are available. -
Page 81: Favourite Programmes
Supervisor level Favourite programmes After switching on, you can also select a programme via: Favourites. 12 programmes can be stored as fa- vourites based on your own priorities and requirements. These favourites will also be made available in the control options –... -
Page 82: Special Programmes
Supervisor level Special programmes – Holding temperature (Process air): cold – 60 °C You can put together five special re- – Cooling down temp. (Process air): sidual moisture or time-controlled pro- 40–55 °C grammes and assign your own pro- gramme names. – Anti-crease First, enter the programme name. -
Page 83: Sort Programmes
Supervisor level Sort programmes Process technology Programmes can be moved within the Anti-crease programme list and in the Favourites At the end of the programme, the list. drum will continue to rotate at intervals – Factory default: Off if the laundry is not removed immedi- ately. -
Page 84: Further Cooling
Supervisor level Further cooling Service Before the end of the programme, the Clean the airways temperature of the dried laundry is The tumble dryer's electronics calcu- monitored and the cooling phase at late the degree at which fluff or deter- the end of the programme is extended gent residue in the fluff filters and air if necessary. -
Page 85: Clean The Filters
Supervisor level Clean the filters Service interval The fluff filter in the air duct area must The tumble dryer shows a custom be cleaned on a regular basis. You can message at a selected interval to set an hourly interval for the reminder. prompt you to undertake specific maintenance tasks. -
Page 86: External Applications
Additional fan External applications External hardware is connected via the External exhaust flap Miele XCI box. External hardware is connected via the If an extra fan is connected, it must be Miele XCI box. switched on at the same time as the The time delay between the external drive unit. -
Page 87: Peak Load Signal
The tumble dryer may only be oper- inserted into the module slot. ated with a peak-load system if this system is connected to the tumble dryer via the Miele XCI box. – Factory default: no function – Peak load with 230 V – Peak load with 0 V... -
Page 88: Wifi
Supervisor level WiFi Network time Control the networking of your tumble The date and time can be synchron- dryer. ised over the network. – Setup – Off This message only appears if the The date and time are not synchron- tumble dryer has not yet been con- ised over the network. -
Page 89: Remote
If you do not install a RemoteUpdate, you can continue to use your tumble – Once a RemoteUpdate has been in- dryer in the usual way. However, Miele stalled, it cannot be undone. recommends installing RemoteUpdates. – Do not switch off the tumble dryer during a RemoteUpdate. -
Page 90: Smartgrid
Supervisor level SmartGrid SmartGrid setting is only visible if a WiFi network has been set up and ac- tivated. This function can be used for starting your washing machine auto- matically at a time when your energy supplier's energy costs are most eco- nomical. -
Page 91: Machine Parameters
If you wish to change the settings after the commissioning process, please Copyrights and Licences contact Miele Service. Miele uses their own and third party software which is not subject to any so- You would like to connect a payment called Open Source Licence for the op- system. -
Page 92: Time / Impulse
Supervisor level Time / impulse Payment system lock To be able to operate the tumble dryer To avoid tampering, a programme lock with conventional payment systems can be set up in programme opera- where multiple coins can be inserted, tion. If the lock is applied, the pro- you can adjust how much time is pur- gramme is interrupted and payment chased each time a coin is inserted. -
Page 93: Debounce Time
Supervisor level Debounce time Duration Cool air In coin mode, the debounce time for The running time can be adjusted. the minimum payment signal that A time of between 10 minutes and must be applied can be adjusted. 2 hours can be set in five-minute inter- –... - Page 95 Tel: (01) 461 07 10, Fax: (01) 461 07 97 P.O. Box 114782 - Dubai E-Mail: info@miele.ie, Internet: www.miele.ie Tel. +971 4 3044 999, Fax. +971 4 3418 852 800-MIELE (64353) Manufacturer: Miele & Cie. KG Carl-Miele-Straße 29, 33332 Gütersloh, Germany E-Mail: info@miele.ae, Website: www.miele.ae...
- Page 96 PDR 908 EL en-GB M.-Nr. 11 115 170 / 00...