Page 2
Civic Office, your household waste disposal service or the shop where you purchased the product. SonicStage and its logo are trademarks of Sony Corporation. ATRAC, ATRAC3, ATRAC3plus and their logos...
Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ballpoint pen.
BTM button 6 To start the BTM function (press and hold). q OFF button To power off/stop the source. r Receptor for the card remote commander 8 * When an MP3/ATRAC CD is played. 7 8 9 SEEK CDX-S2270EE qh qj CDX-S2250EE...
Display items A Source B Track number/Elapsed playing time, Disc/artist name, Group number* Group name, Track name, Text information* , Clock *1 Group number is displayed only when the group is changed. *2 When playing an MP3, ID3 tag is displayed and when playing ATRAC CD, text information written by SonicStage, etc.
Other functions Changing the sound settings Adjusting the sound characteristics — BAL/FAD/SUB You can adjust the balance, fader and subwoofer volume. Press (SEL) repeatedly until “BAL,” “FAD” or “SUB” appears. The item changes as follows: LOW* t MID* t HI* BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)* *1 When EQ3 is activated (page 7).
LPF* (Low To select the cut-off frequency Pass Filter) “78HZ,” “125HZ” or “OFF” *1 When the unit is turned off. *2 When the audio output is set to “SUB.” Using optional remote commander Card remote commander RM-X114 Location of controls The corresponding buttons on the card remote commander control the same functions as those on this unit.
Additional Information Precautions • If your car has been parked in direct sunlight, allow the unit to cool off before operating it. • Power aerial will extend automatically while the unit is operating. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit.
Sony Network products. MP3 file (track) If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse.
Removing the unit Remove the protection collar. 1 Detach the front panel (page 4). 2 Engage the release keys together with the protection collar. Orient the release keys as shown. 3 Pull out the release keys to remove the protection collar. Remove the unit.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Design and specifications are subject to change without notice. • Lead-free solder is used for soldering certain parts. (more than 80 %) • Halogenated flame retardants are not used in the certain printed wiring boards.
The character cannot be displayed with the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at...
Page 19
(DSPL) Совет (MODE) (BTM) Примечание (SOURCE) (1) (6)
Page 20
(1) (6) При использовании пульта дистанционного управления (SEEK) Совет (SEEK) – (SEEK) – Примечание При использовании пульта дистанционного управления (SEL) < M , (EQ3)
Page 21
(SEL) При использовании пульта дистанционного управления < M , (SEL) (SEL) (SEL) Примечание При использовании пульта дистанционного управления < (SEL)
Page 24
В последнее время некоторые фирмы звукозаписи выпускают музыкальные диски, закодированные с использованием технологии защиты авторского права. Помните, что некоторые из таких дисков не отвечают требованиям стандарта CD и их нельзя воспроизводить с помощью данного устройства. О файлах MP3 MP3 является сокращением от MPEG-1 Audio Layer-3 и...