TY-FB9BD 1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
TY-FB9BD 2 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
TY-FB9BD 3 About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
TY-FB9BD 7.2. HU-Board Block Diagram IC3304 HU DUAL VIDEO TERMINAL(BNC/S) IC3307 HD VIDEO DECODER (10bit ADC) LVDS TX 1.8V TO J13 IC3301 3.3V TCLK+ TXC+ TCLK- TXC- AV SW VIDEO DOUT(2) TX3+ SIGNAL DOUT(3) PROCCESSOR TX3- DOUT(4) V/CVB YOUT (+6db)
TY-FB9BD 8.2. Electrical Replacement Parts List Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C3444,4 EEEHB0J470R C 47PF, J, 6.3V C3301- ECJ1XC1H561J C 560PF, J, 50V C3446 ECJ1XB1C104K C 0.1UF, Z, 16V...
Page 15
TY-FB9BD Ref. Part No. Part Name & Remarks Description R3336,3 ERJ3GEYJ101 M 100 OHM,J,1/16W R3338,3 ERJ6GEYJ102 M 1KOHM,J,1/10W R3340,4 ERJ3GEYJ151 M 150 OHM,J,1/16W R3342,4 ERJ3GEYJ100 M 10 OHM,J,1/16W R3344 ERJ3GEYJ102 M 1KOHM,J,1/16W R3345,4 ERJ3GEYJ331 M 330 OHM,J,1/16W R3347,4 ERJ3GEYJ221 M 220 OHM,J,1/16W...