Installation
a Extraction, recirculation with
conversion kit DUU 150.
b The wall unit housing needs to be 1
1/2" (38 mm) shorter than the wall
unit door.
c Installation is also possible in a 23
5/8" (600 mm) wide unit. In the
process, the following must be
observed:
– The side units must also be
shortened by 1 1/2" (38 mm).
– The doors of the built-in unit and
side units must be opened to the
top so that the grease filters are
accessible.
d The ducting can also be connected
at the back.
e After installation, the wall unit can be
fitted with an interim panel. If this is
done, make sure that the slots for
the grease filters and, for the
charcoal filters in recirculation mode,
remain easily accessible.
f Alternatively, the wall unit can be
fitted with side sections.
40