Changing The Hepa Filter - Miele PG8582 CD Operating Instructions Manual
Washer-disinfector
Hide thumbs
Also See for PG8582 CD:
- Installations plan (14 pages) ,
- Operating instructions manual (164 pages)
Table of Contents
Advertisement
Changing the
HEPA filter
Replace with an Original Miele HEPA filter classification 13 for
optimum performance.
If possible the HEPA filter should be changed by Miele during a
service. If this is not possible, proceed as follows to change the filter:
Open the side unit drawer and remove the filter grille and coarse
filter.
Undo the screws securing the coarse filter housing and swing it
upwards.
Remove the coarse filter housing.
Remove the HEPA filter from its holder and insert a new one.
Replace the coarse filter housing and tighten the securing screws.
Replace the coarse filter and the filter grille and close the side unit
drawer.
Whenever the HEPA filter is replaced the operating hours counter
must be reset (see "Resetting the operating hours counter").
Maintenance
121
- Quick Links:
- Technical Faults and Messages
Hide quick links:
Advertisement
Table of Contents
