Miele W3035 Product Dimensions

Large capacity washing machine angled control

Hide thumbs Also See for W3035:

See also: Operating and Installation Instruction

Product Dimensions

Large Capacity Washing Machine

Angled control

W3035 / W3037

Location Codes

5 foot flexible drain hose connects

upper left rear.

120 Volt, 15 Amp 5 foot molded plug

power supply connects upper left rear

(NEMA 5-15 Configuration).

5 foot separate flexible hot and cold

water intake hoses connect upper left

rear.

• All installations must be done in accordance with local codes

• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements

• Remove transport struts in rear of machine before installation.

Notes

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 08262011

Table of Contents

Page 1 Product Dimensions Large Capacity Washing Machine Angled control W3035 / W3037 Location Codes D 5 foot flexible drain hose connects upper left rear. E 120 Volt, 15 Amp 5 foot molded plug power supply connects upper left rear (NEMA 5-15 Configuration).
Page 2 Product Dimensions Large Capacity Washing Machines Flat controls - Decor Unit W3039i Decor White Location Codes D 5 foot flexible drain hose connects upper left rear. E 120 Volt, 15 Amp 5 foot molded plug power supply connects upper left rear (NEMA 5-15 Configuration).
Page 3 Notes • Needed depth will vary by model number: W3033-W3035: 24" minimum W3039i: 25" minimum • Typically requires removal of unit's lid. Out of box unit height dimension withoutlid is 32 5/16" - 32 11/16". NOTE: Drawing is not to scale.
Page 4 Product Dimensions Laundry Stand WTS410 - White Only Notes • For use with both large and super capacity washers or tumble dryers. • All installations must be done in NOTE: Drawing is not to scale. accordnace with local codes SPECIFICATION SHEETS 08262011...
Page 5 • Remove transport struts in rear of machine before installation. • WTV 407 Stacking kit for W3033, T8003, T8013C • WTV 410 Stacking kit for W3039i / T8019Ci • WTV 419 Stacking kit for W3035 / T8005 NOTE: Drawing is not to scale. SPECIFICATION SHEETS 08262011...