Notes On Delegated Regulation (Eu) No. 665/2013 And 666/2013; Illustrations; Preparing For Use - Miele HS11 Operating Instructions Manual
Hide thumbs
Also See for HS11:
- Operating instrucktion (128 pages) ,
- Operating instructions manual (128 pages) ,
- Operating instructions manual (21 pages)
Table of Contents
Advertisement
Available languages
Available languages
en
Notes on Delegated Regulation
(EU) No. 665/2013 and
666/2013
This vacuum cleaner is a general pur‐
pose vacuum cleaner.
The adjustable floorhead supplied is
designed, when set to the carpet set‐
ting, for intensive vacuuming of carpets
as described in Delegated Regulation
(EU) No. 665/2013 and 666/2013.
The hard floorbrush, if supplied, is de‐
signed for intensive vacuuming of hard
floors with gaps and crevices as descri‐
bed in the above regulations. If this is
not supplied with your vacuum cleaner,
use the adjustable floorhead supplied in
the hard floor setting for intensive
cleaning of hard floors with gaps and
crevices as described in the above reg‐
ulations.
Illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating instruc‐
tions.
Preparing for use
Attach the suction hose (dia. 01)
Insert the hose connector into the
suction socket on the vacuum clea‐
ner until it clicks into position. To do
this, line up the guides on the two pi‐
eces.
To detach the suction hose (dia. 02)
Press the release buttons at the side
of the hose connector, and lift the ho‐
se from the socket.
36
Connect the suction hose to the han‐
dle (dia. 03)
Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following tubes, depending on
model:
– EasyLock suction tube
– Telescopic suction tube
To assemble the EasyLock tube
(dia. 04)
Hold the suction tube by the connec‐
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi‐
tion.
Slide the connection piece upwards
until it clicks into position.
Connect the handle to the suction
tube (dia. 05)
Insert the handle into the suction tu‐
be until it clicks into position. To do
this, line up the guides on the two pi‐
eces.
To detach the handle
To detach the handle from the sucti‐
on tube, press the release button
and pull the handle out of the sucti‐
on tube, twisting it slightly as you do
so.
To adjust the telescopic tube (dia. 06)
One part of the telescopic tube is
packed inside the other and can be ad‐
justed to suit your height for comforta‐
ble vacuum cleaning.
Advertisement
Chapters
Table of Contents
