Miele DA3460 Installation Instructions Manual
Hide thumbs
Also See for DA3460:
- Operating and installation manual (40 pages) ,
- Operating and installation manual (40 pages) ,
- Operating and installation instructions (40 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele DA3460
Summary of Contents for Miele DA3460
-
Page 1: Installation Instructions
Installation Instructions DA3460, DA3480, DA3490 en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. -
Page 2: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable. -
Page 3: Appliance Dimensions
Appliance dimensions 1 1/8"... - Page 4 Appliance dimensions 1 1/8" * The hood can also be installed in a 23 " (60 cm) cabinet.
- Page 5 Appliance dimensions 1 1/8" * The hood can also be installed in a 23 " (60 cm) cabinet.
-
Page 6: Distance Between Cooktop And Hood (S)
Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Non-Miele Cooktops Electric Cooktops 24"... - Page 7 Installation Installation accessories...
-
Page 8: Installation
Installation a 2 runners (1 x right, 1x left) to support the hood in the cabinet. 8 screws 4 x 15 mm b 1 spacer strip to anchor the ventilation hood in the cabinet. to conceal the gap between the rear of the appliance and the wall. - Page 9 Installation...
-
Page 10: Installing The Space Bar
Installation 1. Installing the space bar T = K cabinet depth minus G hood depth ^ The hood depth G depends on the custom panel: – a Hood installed without front panel – b Hood installed with a cabinet ^ Screw the space bar flush with the matching custom panel wall under the cabinet side walls. -
Page 11: Installing The Hood In The Cabinet
Installation 2. Runners 3. Installing the hood in the cabinet ^ Lay the hood on its back side. Do not remove the installation protector between the deflector and casing before the installation is completed. The runners are made for side walls of 5/8"... - Page 12 Installation ^ Take the grease filter out and put it aside. ^ Push the deflector back in. ^ Insert the hood into the cabinet from below and until the spring clips click into place. ^ When installing a 29 " (80 cm) or a 35 "...
-
Page 13: Secure The Appliance
Installation 4. Secure the appliance ^ Push the hood back so it sits flush with the front of the spacer strip. ^ Pull the deflector out. Fig 1 ^ Screw the fixing brackets to the cabinet rear wall. ^ Screw the hood, with 4 screws, onto the runners. -
Page 14: Install The Front Panel If Necessary
Installation The DA3460, DA3480 and DA3490 Built-In Ventilation Hoods all include brackets to affix the hood body to the rear wall of the enclosing cabinet. (Fig. 1) These brackets are necessary to ensure the long-term rigidity and stability of the installed appliance. -
Page 15: Install The Grease Filter
Installation 6. Install the grease filter Weight of the front panel The weight of the front panel must not exceed 2.8 lbs (1.3 kg). This applies for front panels with a depth of up to 1 " (30 mm). In the case of front panels of greater depth or greater weight, the weight must be reduced by milling out the back of the panel, for instance. - Page 16 For recirculation mode a respective installation kit is recommended which can be obtained from Miele. In addition an active charcoal filter is needed. ^ Install the installation kit as described in the manual supplied with the kit.
-
Page 17: Air Extraction
Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipework made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. Gas cooking appliances release To achieve the most efficient air extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled. -
Page 18: Condensate Trap
Air extraction Condensate trap optional accessory In some cases, a condensate trap may also be required to collect and evaporate any condensate which may occur. This optional accessory is available for ducts 5" (125 mm) and 6" (150 mm) in diameter. –... -
Page 19: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. ,WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 20: Technical Data
Technical Data Maximum load ....450 W Light..... 2 x 50 W Voltage . - Page 23 Alteration rights reserved / 3912 M.-Nr. 09 190 990 / 03 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.