Page 3
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
Page 5
RM-555 ESD protection ESD protection Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use.
Page 7
Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Business Group should be notified in writing/e- mail. Please state: •...
Page 9
RM-555 Nokia N97 mini; L3&4 Service Manual Structure Nokia N97 mini; L3&4 Service Manual Structure 1 General Information 2 Service Tools and Service Concepts 3 BB Troubleshooting and Manual Tuning Guide 4 RF Troubleshooting 5 Camera Module Troubleshooting 6 System Module and User Interface...
RM-555 General Information Product selection RM-555 is a GSM/HSDPA/WCDMA tri-mode handportable multimedia computer with a person centric touch UI, integrated GPS (A-GPS OMA SUPL) and WLAN. It supports EGSM 850/900/1800/1900 and WCDMA 900/1900/2100 bands, and CSD/HSCSD, GPRS/EGPRS, WCDMA/HSDPA data bearers.
Page 17
• Nokia XpressPrint – direct printing via USB (PictBridge), Bluetooth (BPP), and WLAN (UPnP), from memory card or via online printing Store • 8GB internal user memory • Nokia XpressTransfer – easy to transfer and organize photos and video between your device and a compatible PC • Nokia Lifeblog (mobile & PC) Music •...
Page 18
• MicroSD memory card - support up to 16GB • Nokia 3.5 mm AV connector Add-on software framework • Symbian 9.4 OS • Nokia Series 60, 5th edition, feature pack 2 • Java: MIDP2.0 • C++ and Java SDKs Additional technical specifications •...
The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM-555. For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.
Page 32
• Provides galvanic connection to all needed test pads in module • Multiplexing between USB and FBUS media, controlled by Vusb • Connector for control unit • Access for Audio-, MMC, and USB connectors • Module jig attenuation values for RM-555: Band Attenuation GSM850 TX 824-849 0.2dB...
The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM-555. For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.
Figure 22 Use 1 phone screw from the bottom side of the Module Jig Touch panel recalibration General After replacing the RM-555 A-Cover, the touch panel settings in the phone must be recalibrated to match with the new touch panel. To perform this procedure, you will require the following equipment: •...
The vibra motor is connected to the Avilma ASIC VibraP and VibraN Pulse Width Modulated (PWM) outputs. Figure 85 Vibra circuitry Accessory AV connector The features that are supported by RM-555 accessory interface are the following: • Audio output (stereo headset/headphones having the impedance >16ohm) Page 6 –30...