Table of Contents
Advertisement
Place the exhaust ducting on the
exhaust collar for the rangehood.
See "Connection for air extraction"
for further instructions on fitting the
ducting.
Set up for recirculation mode
If site conditions are not suitable for the
rangehood to be used with air
extraction, the appliance must be set
up for recirculation. The DUU 151
conversion kit, available from Miele, is
required for operating the rangehood in
recirculation mode. You will also need a
charcoal filter (see "Technical data").
Fit the conversion kit as described in
the installation instructions supplied
with the kit. Make sure that the slats
in the exhaust grille point towards the
centre of the room and not towards a
wall or the ceiling.
A non-return flap is not used in
recirculation mode.
Installation
37
Hide quick links:
Advertisement
Table of Contents
